suppose my config is as below.
# brctl addbr mybridge
# brctl addif mybridge eth0
# brctl addif mybridge eth1
# ifconfig mybridge up
# ifconfig mybridge 192.168.100.5 netmask 255.255.255.0
now if the an l3 packet has to egress from mybridge
which port will be chosen ?
thanks
On Wed, Feb 2, 2011 at 1:53 PM, Nicolas de Pesloüan <nicolas.2p.debian@xxxxxxx> wrote:
Le 02/02/2011 09:02, Sinbad a écrit :Can you describe your configuration a little bit more (possibly using the commands used to setup that configuration)?
hi,
suppose a vlan has 3 member ports and vlan is configured as an l3 interface
and if data is suppose to go out using that vlan interface, which
physical port
will be chosen among the 3 member ports ?
Nicolas.
_______________________________________________ Bridge mailing list Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/bridge
