On Sun, 31 Oct 2010 00:31:11 +0800 Kian Yang Liew <liewkianyang@xxxxxxxxx> wrote: > Dear All, > > > > I have a network with 500 vlan and I bind all these 500 vlan into 1 bridge > interface. Then I have run a dhcp server on this bridge interface to provide > dhcp to all the computer in the vlan. It look find all the time, but > sometime, some of the computer on vlan will not able to get the ip from dhcp > server but after I remove the vlan and add back to the bridge it will work > again. The most serious case is sometime there will be a dhcp problem on > vlan 1 as well, and I need to reboot the server only can make the service > back to normal. > > > > The setting is as below > > > > > > Vconfig add eth1 2 > > Vconfig add eth1 3 > > . > > . > > . > > . > > . > > .vconfig add eth1 500 > > > > Then ifconfig eth1.2 up …. Ifconfig eth1.500 up > > Then brctl addbr br1, brctl addif br1 eth1.2 ……. Brctl addif br1 eth1.500 > > > > Does anyone have face this problem before? Your reply is highly appreciate. > brctl stp br0 off brctl setfd br0 0 _______________________________________________ Bridge mailing list Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/bridge
