hi! i'm using dynamips (router/switch emulator) and would like to have an interface on the host as a link to the 'emulated lab'. with dynamips, one of the host's interfaces can be used to connect to a port of the 'emulated lab'. dynamips obviously injects its packets into this interface, and sniffs for packets directed towards the 'emulated lab'. now i just have a single physical interface on the host. and i don't want the lab-traffic to pass thru the physical interface (and productive segment connected to it). so i thought hey, let's be clever, just create a bridge. we don't need any bridge-members (yet), we just want to use it for the dynamips link for now. after a brctl addbr, i get a bridge-interface - with a mac of 00:00:00:00:00:00. tried it anyway: it doesn't work (i see arp-requests from the host, i see arp-replies to the host - which the host obviously simply ignores, most probably because of the all-zero-mac). turns out it's also not possible to change the mac - not even to a locally administered mac. is there a special way to set the bridge's mac? actually i find it quite irritating that it's not simply possible to change it just like with any other interface!? also i think it might not be wise to treat 00:00:00:00:00:00 special, filter it, or similar (after all it's a valid global unicast mac - assigned to xerox...). regards, Chris _______________________________________________ Bridge mailing list Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/bridge
