Dear all, I’m currently working on a Ethernet bridge for a
system. I have a machine(not PC, but an embedded system) which has two Ethernet
ports, I wanted to configure it into a Ethernet bridge which connect other PC. I have tested on configuring it into a bridge where the two
PC able to ping each other and send files. I’m wondering that whether I
can involve the embedded Linux system in the network, where the two PC able to
detect the Linux OS( embedded system) and able to send files and communicate
with it as the figure below:
PC1 PC2 PC1 PC2 I have try to add an IP to the bridge (virtual port) and the
PCs are able to Ping the bridge’s IP. Then I’d tried to configure the network to be like
below:
PC1 and PC2 can ping each other can communicate well. I have
added IP to both bridge, but the result is that, PC1 only able to ping bridge1’s
IP and not bridge2’s IP. PC2 as well, is only able to ping bridge2’s
IP and not able to ping bridge1’s IP. Do you have any suggestion for me to configure the bridge so
that both bridge can be detected by each of the PC that connected to them? Thank you very much in advance. Regards, Ming
Ann
------------------------------------------------------------------ |
_______________________________________________ Bridge mailing list Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/bridge