I have this very uncommon situation :). My diploma thesis will probably be playing with linux kernel in various networks. Currently I have little free time and limited computer resources -> only one laptop :). But I would like to do some profiling of kernel particularly of bridging part. For that i need network.
So i have 2 virtual machines VPC1 and VPC2 (running debian)
HOST - VPC1 - VPC2
VPC1 should act as bridge.
HOST: tap0 interface
VPC1:
eth0 ~ tap1 on host
eth1 ~ tap2 on host
VPC2:
eth0 ~ tap3 on host
how to connect it? :) Well tap0 - tap1 is in br0 on host and tap2 + tap3 is on br1.
VPC1 than has eth0 and eth1 in bridge also :).
I know..it looks strange..but i thought its simplest :).
But:
1) although VPC2 is connected through br1 that has connection only with tap2=eth1 on VPC1..I can ping anything even when VPC1 has all interfaces down
2) i dont see any loop in my "network" but anyway once i turn on br0 without stp on VPC1, i got quite a serious perf problem - little storm i guess:).
starting stp solves storm but disables eth0
[ 3839.200640] br0: starting userspace STP failed, starting kernel STP
[ 3839.201388] br0: topology change detected, sending tcn bpdu
[ 3839.202117] br0: port 2(eth0) entering blocking state
i does not matter if i have stp on HOST's br0/br1
If someone would have time to help me with that I'll be very happy :). Its possible Im trying approach that is doomed to fail because i dont know/understsand something.
Cheers,
Radim
_______________________________________________ Bridge mailing list Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/bridge
