On Fri, 11 Sep 2009 19:52:02 +0530 ratheesh k <ratheesh.ksz@xxxxxxxxx> wrote: > i bridged eth0 (ethernet ) and ap0 (wireless ) using brctl command . > The bridge interface is br0 . i connected a linux desktop (Machine A > ) to eth0 and Machine B to ap0 . > > I have ingress qdisc and egress qdisc on br0 . > > if i ping MAchine A from Machine B , will the icmp pkts will go thru > any of the qdisc ( egress or ingress ) ?????? > _______________________________________________ > Bridge mailing list > Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx > https://lists.linux-foundation.org/mailman/listinfo/bridge The bridge pseudo-device (br0) is only used for packets arriving at the host, not for packets transiting through the bridge. If you apply QoS on br0 (output), then it will only apply to locally generated packets. Likewise ingress will only apply to packets whose final destination is the bridge machine. To do QoS on packets going through the bridge, apply QoS to the underlying devices (eth0, ap0). -- _______________________________________________ Bridge mailing list Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/bridge
