Benny Amorsen <benny+usenet@xxxxxxxxxx> wrote on 19/08/2009 18:40:10: > > Joakim Tjernlund <joakim.tjernlund@xxxxxxxxxxxx> writes: > > > trying to do private VLAN, http://tools.ietf.org/html/draft-sanjib-private-vlan-10, > > using ebtables. It does not seem to be enough to only filter > > pkgs. Isolated port are special and, as I understand it, they only > > receive pkgs from the uplink via the primary VLAN and only > > TX onto the isolated VLAN on the uplink(forget about other ports, it is > > the uplink that is the problem) > > You are trying to make private VLAN's, and at the same time you're > mixing in 802.1q tagging... I think you should start with making > everything work using physical interfaces only. ehh, 802.1q tagging is required for PVLAN. I have one uplink to another switch. You have to treat the Isolated/Primary VLANs especially though. _______________________________________________ Bridge mailing list Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/bridge
