On Tue, Aug 19, 2008 at 5:32 AM, joy c <cjjoy1980@xxxxxxxxx> wrote: > Hi, > I am trying to creat a bridge with the following command: > brctl addbr br0 > brctl addif br0 eth0 > brctl addif br0 pci0 > ifconfig eth0 up > ifconfig pci0 up > ifconfig br0 up > dhclient br0 > > I am able to see the bridge and interfaces to the bridge using brctl show > command.. But when I run the > dhclient br0 command, the system stops responding. I am not able to see > anything on the termnial and the termnial does not respond... Please let me > what is the problem.... Do virtual terminals still work (Alt+F2, Alt+F3, ...)? If yes, then you're not receiving a dhcp response and your dhclient is configured with a long timeout. If no, then one of your kernel modules is hanging your system. Include the output of "uname -a" and "lsmod". > > Thanks, > joy > > _______________________________________________ > Bridge mailing list > Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx > https://lists.linux-foundation.org/mailman/listinfo/bridge > _______________________________________________ Bridge mailing list Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/bridge
