Re: [?? Probable Spam] Bridge Digest, Vol 43, Issue 22

"Alex" <alex@xxxxxxxxxxxxxxx> · Fri, 30 Mar 2007 10:46:14 +0800

hi:
1. I use bridge-utils-1.2 
version
2.following is my bridge 
setting

./sethdlc hdlc0 hdlc-eth
./sethdlc hdlc1 hdlc-eth
ifconfig hdlc0 hw 
ether 000123450040
ifconfig hdlc1 hw ether 000123450041
./brctl addbr 
br0
./brctl stp br0 off
./brctl addif br0 eth0
./brctl addif br0 
eth1
./brctl addif br0 hdlc0
./brctl addif br0 hdlc1
ifconfig eth0 
down
ifconfig eth1 down
ifconfig hdlc0 down
ifconfig hdlc1 
down
ifconfig eth0 0.0.0.0 up
ifconfig eth1 0.0.0.0 up
ifconfig hdlc0 
0.0.0.0 up
ifconfig hdlc1 0.0.0.0 up
ifconfig br0 up

3.I am not set multicast 
address in bridging.
  How to make static filtering entries and
  how to make group MAC addresses (multicast addresses) in
 bridging?

Thanks a lot!

Alex

2007-03-30

发件人： 
bridge-request@xxxxxxxxxxxxxxxxxxxxxxxxxx
发送时间： 
2007-03-30 03:00:16
收件人： 
bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx
抄送： 
主题： [?? Probable Spam] 
Bridge Digest, Vol 43, Issue 22

Send Bridge mailing list submissions to
bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx

To subscribe or unsubscribe via the World Wide Web, visit
https://lists.linux-foundation.org/mailman/listinfo/bridge
or, via email, send a message with subject or body 'help' to
bridge-request@xxxxxxxxxxxxxxxxxxxxxxxxxx

You can reach the person managing the list at
bridge-owner@xxxxxxxxxxxxxxxxxxxxxxxxxx

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Bridge digest..."

Today's Topics:

   1. Static filtering entries in bridging -- linux 2.4.20 kernel
      (Majjari Vikram(TLS-ESG), Bangalore)

----------------------------------------------------------------------

Message: 1
Date: Thu, 29 Mar 2007 17:33:28 +0530
From: "Majjari Vikram(TLS-ESG), Bangalore"  
<Majjari.Vikram@xxxxxx >
Subject: [Bridge] Static filtering entries in bridging -- linux 2.4.20
kernel
To:  <bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx >
Message-ID:
<AFB2687AB4F98E419EDFA205E376D4132C7CFB@xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 
>

Content-Type: text/plain; charset="iso-8859-1"

Hi all

            Iam working on bridging in linux 2.4.20 kernel. can any one
help me on these questions.

1. 
how to make static filtering entries and
2. 
how to make group MAC addresses (multicast addresses) in
bridging.

Eagerly waiting for reply.

Vikram.

DISCLAIMER:
-----------------------------------------------------------------------------------------------------------------------

The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
It shall not attach any liability on the originator or HCL or its affiliates. Any views or opinions presented in 
this email are solely those of the author and may not necessarily reflect the opinions of HCL or its affiliates.
Any form of reproduction, dissemination, copying, disclosure, modification, distribution and / or publication of 
this message without the prior written consent of the author of this e-mail is strictly prohibited. If you have 
received this email in error please delete it and notify the sender immediately. Before opening any mail and 
attachments please check them for viruses and defect.

-----------------------------------------------------------------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.linux-foundation.org/pipermail/bridge/attachments/20070329/f4d25656/attachment-0001.htm 

------------------------------

_______________________________________________
Bridge mailing list
Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/bridge

End of Bridge Digest, Vol 43, Issue 22
**************************************
_______________________________________________
Bridge mailing list
Bridge@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/bridge