Re: Bridge IP not answering

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 1 Mar 2007 11:47:40 -0600
"Fernando Rodriguez" <frod@xxxxxxxxxxxxx> wrote:

> Hello, 
> 
> I have set up a bridge with the following script that starts after the
> network interfaces are started
> 
> BRIDGENAME="BRQ"
> GATEWAY="192.168.0.1"
> BRIDGE_IP="192.168.0.122"
> BRIDGE_NETMASK="255.255.255.0"
> STP_ON="yes"
> STP_PRIO="1"
> RETVAL=0
> 
> start() {
>         echo "Starting service bridge"
>        ifconfig eth2 promisc up
>         ifconfig eth3 promisc up

You don't need to do this (set promisc mode). And it can
cause more load.

>         brctl addbr $BRIDGENAME  ||  return=$rc_failed
>         brctl addif $BRIDGENAME eth2  ||  return=$rc_failed
>         brctl addif $BRIDGENAME eth3  ||  return=$rc_failed
>         ifconfig eth2 0.0.0.0  ||  return=$rc_failed
>         ifconfig eth3 0.0.0.0  ||  return=$rc_failed
>         brctl sethello $BRIDGENAME 1  ||  return=$rc_failed
>         brctl setmaxage $BRIDGENAME 4  ||  return=$rc_failed
>         brctl setfd $BRIDGENAME 4  ||  return=$rc_failed
>         brctl stp $BRIDGENAME $STP_ON
>         brctl setbridgeprio $BRIDGENAME $STP_PRIO
>         ifconfig $BRIDGENAME $BRIDGE_IP netmask $BRIDGE_NETMASK up

>         ip route flush cache
>         ip route add default via $GATEWAY

You may need to add 'dev $BRIDGENAME' to that

> 
> But the problem i have is that i am not able to contact the bridge on its IP
> 192.168.0.122 i am running Centos 4.4 on a 2.6.18 kernel, i have tested this
> setup on 3 different sets of network cards tg3, b44, via-rhine and in all of
> them i have the same results no connection, i know the bridge is working
> otherwise packets couldnt flow on the network, im using bridge utils 1.0.4-4

What is state of bridge? 
	brctl showstp $BRIDGENAME

Is it picking up the mac addresss?
	brctl showmacs $BRIDGENAME

> If any one knows what could be wrong??

Is bridge pseudo device receiving packets?
	ip -s -s link show $BRIDGENAME
 
> Or does any one has a script or an example on how they set up their bridge
> in order to be able to access it via its IP
> 


-- 
Stephen Hemminger <shemminger@xxxxxxxxxxxxxxxxxxxx>
_______________________________________________
Bridge mailing list
Bridge@xxxxxxxxxxxxxx
https://lists.osdl.org/mailman/listinfo/bridge


[Index of Archives]     [Netdev]     [AoE Tools]     [Linux Wireless]     [Kernel Newbies]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]     [Video 4 Linux]

  Powered by Linux