Hello All, Hope someone will address my problem. I configured my Linux box (2.4.21 kernel) with the ebtables-brnf-10_vs_2.4.21 patch. I had installed the bridge-utils package also. As soon as the I type the following commands, it hangs #ifconfig eth0 0.0.0.0 #ifconfig eth1 0.0.0.0 #brctl addbr br0 #brctl addif br0 eth0 #brctl addif br0 eth1 #ifconfig br0 up The following scenario explains my setup: Thank in advance. Any help will be highly appreciated. Regards, Suraj DISCLAIMER: This email (including any attachments) is intended for the sole use of the intended recipient/s and may contain material that is CONFIDENTIAL AND PRIVATE COMPANY INFORMATION. Any review or reliance by others or copying or distribution or forwarding of any or all of the contents in this message is STRICTLY PROHIBITED. If you are not the intended recipient, please contact the sender by email and delete all copies; your cooperation in this regard is appreciated. -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.osdl.org/pipermail/bridge/attachments/20070206/ae79f8d5/attachment-0001.htm -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: image/gif Size: 4279 bytes Desc: image002.gif Url : http://lists.osdl.org/pipermail/bridge/attachments/20070206/ae79f8d5/attachment-0001.gif
