Hi there, I'm trying to set up a man-in-the-middle scenario within a VMWare Workstation team, using brctl. What I want is the following: PC1 eth0 >---LAN-segment-1---< eth0 PCMITM eth1 >---LAN-segment-2---< eth0 PC2 Now I did the following on PCMITM (PC man in the middle): ifconfig eth0 down ifconfig eth1 down brctl addbr lnxbr0 brctl addif lnxbr0 eth0 brctl addif lnxbr0 eth1 ifconfig eth0 0.0.0.0 ifconfig eth1 0.0.0.0 ifconfig lnxbr0 up All commands exit successfully and I get eth0, eth1 and lnxbr0 listed in ifconfig. brctl show says: bridge name bridge id STP enabled interfaces lnxbr0 8000.000c296df055 no eth1 eth0 which also seems alright to me. But now the problem: although PC1 and PC2 are in the same IP subnet (addresses 192.168.222.1 and 192.168.222.2), a ping doesn't pass the bridge. By starting "ping pc2" on PC1 and "ping pc1" on PC2, I ensure that both machines are transmitting data frequently, and thus should show up in "brctl showmacs", but brctl showmacs lnxbr0 says: port no mac addr is local? ageing timer 1 00:0c:29:6d:f0:55 yes 0.00 2 00:0c:29:6d:f0:5f yes 0.00 2 00:0c:29:97:e3:a6 no 0.14 So there is one NIC missing - that one of PC1. Does anyone have an explanation? I don't know what could be wrong in my setup, I don't even know where to start... Any help is appreciated. By the way: The LAN segments within VMWare seem to be working. If I give each NIC on PCMITM an IP address (with no bridge on PCMITM), I can transfer data from PC1 to PCMITM (and vice versa) and from PC2 to PCMITM (and vice versa). Patrick. -- Key ID: 0x86E346D4 http://patrick-nagel.net/key.asc Fingerprint: 7745 E1BE FA8B FBAD 76AB 2BFC C981 E686 86E3 46D4 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available Url : http://lists.osdl.org/pipermail/bridge/attachments/20061210/75e542c2/attachment.bin
