On Sun, 27 Aug 2006 10:05:01 -0400 "Joubert Berger" <joubertb at gmail.com> wrote: > I was running a frame loss test the other day against an rhel4 smp > kernel and a non-smp kernel. I noticed I was getting better numbers > when I ran the non-smp kernel. I was surprised by that. Anyone have > any insight into this? I am running this with e1000 dirvers. Turning NAPI on/off might change the numbers slightly. > I also ran a test where I ran the smp kernel with hyper threading > turned on and off. There, the frame loss numbers were worse when > hyper threading was turned off. I would not have thought that having > hyperthreading turned off would make such a big difference. > > Just trying to make sense of these numbers :-) > > --joubert Forwarding packets is inherently single threaded, the additional CPU's can't really make it any faster. They can only cause additional cache misses and locking overhead. The additional CPU's might help if you performed a bidirectional or multiple interface test. Forwarding packets shouldn't normally CPU bound, it is limited by the bus and interrupt rate. If you are doing lots of firewalling that can change.
