Stephen Hemminger schrieb: > > Did the bridge get set up right? Did the interfaces come up (look at 'brctl showstp br0') > $ ifconfig eth0 0.0.0.0 down $ ifconfig eth1 0.0.0.0 down $ brctl addbr br0 $ brctl stp br0 on $ brctl addif br0 eth0 $ brctl addif br0 eth1 $ ifconfig eth0 0.0.0.0 up $ ifconfig eth1 0.0.0.0 up $ ifconfig br0 0.0.0.0 up $ brctl showmacs br0 port no mac addr is local? ageing timer 1 00:11:22:33:44:50 yes 0.00 2 00:11:22:33:44:51 yes 0.00 2 00:11:95:34:af:01 no 2.91 2 00:c0:02:39:53:52 no 2.76 $ brctl showstp br0 br0 bridge id 8000.001122334450 designated root 8000.001122334450 root port 0 path cost 0 max age 20.00 bridge max age 20.00 hello time 2.00 bridge hello time 2.00 forward delay 15.00 bridge forward delay 15.00 ageing time 300.00 hello timer 1.45 tcn timer 0.00 topology change timer 0.00 gc timer 273.04 flags eth0 (1) port id 8001 state learning designated root 8000.001122334450 path cost 100 designated bridge 8000.001122334450 message age timer 0.00 designated port 8001 forward delay timer 3.48 designated cost 0 hold timer 0.44 flags eth1 (2) port id 8002 state learning designated root 8000.001122334450 path cost 100 designated bridge 8000.001122334450 message age timer 0.00 designated port 8002 forward delay timer 3.45 designated cost 0 hold timer 0.43 flags > The bridge is sensitive to the network devices reporting carrier properly, > so a bad network driver or card will make it not work. > > -- ------------------------------------------------------------------------ Jürgen Pfeiffer * _mailto:j.pfeiffer at seskion.de_ SesKion Softwareentwicklung und System Konzeption GmbH ( : +49-711-9905814 Karlsruher Str. 11/1 Fax: +49-711-9905827 D-70771 Leinfelden-Echterdingen 1 _http://www.seskion.de_ ------------------------------------------------------------------------ -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.osdl.org/pipermail/bridge/attachments/20060726/e3025312/attachment.htm
