On Wed, 29 Jun 2005 11:41:59 +0800 munro <munro.biswal@xxxxxxxxxxxxxxxx> wrote: > Hi, > > What is wish to do is > There are four interfaces here > > PC1---------------------| br0 > |if0-------------------if2| br1 | ----------------------PC2 > | > |if1------------------- if3| | > > > br0 and br1- are two transperent bridges on separate devices. > if0 and if1 are two physical interfaces(ports) attached to each of the > bridges on either side. > > What i intend to do is to redirect all traffic coming towards br0 > from PC1 through interface/port if1, even if the source mac is learnt > through if0 and the same on the other bridge br1 on the other device. > Similarly, any traffic coming from PC2 has to go through if2 instead > of if3 before it enters br0. So in all, what i want to do is make the > link from br0 to br1 full duplex if the physical links are half-duplex. > > Regards, > Munro. That would create a possible loop if the links are full duplex, and that would be a disaster! Maybe you could do what you want with the bonding interface?
