Hi Srs I have a linux like a bridge LAN - BRIGE -ROUTER The bridge has a ip ( non public IP) The bridge is working fine but y need to set up the Squid on the same machine where is installed the BRIDGE. I was looking for the answers and say: httpd_accel_host virtual httpd_accel_port 80 httpd_accel_with_proxy on httpd_accel_uses_host_header on and put this rules with iptables iptables #8722;t nat #8722;A PREROUTING #8722;i eth0 #8722;p tcp #8722;#8722;dport 80 #8722;j REDIRECT #8722;#8722;to#8722;port 3128 eth0 go to Router eth1 go to LAN iptables #8722;A INPUT #8722;i interface #8722;p tcp #8722;d your_bridge_ip #8722;s local#8722;network #8722;#8722;dport 3128 #8722;m state #8722;#8722;state NEW,ESTABLISHED #8722;j ACCEPT (replace interface by eth1 LAN) But it don't work because i see the /var/log/squid/access.log and not see anything Thank in advance for your help juan --------------------------------- Do you Yahoo!? Check out the new Yahoo! Front Page. www.yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.osdl.org/pipermail/bridge/attachments/20041112/654616cc/attachment.htm
