Hi, All:
I am tring to use STP function on bridge device that refer the
BRIDGE-STP-HOWTO. And I use PING program to test it from PC1 to
PC2. But the forward function is become too long when bridge topology
change.
How can I tuning the STP to make client connect to another again faster?
I have been use follow command. But it seen not this issue. Bcause, if I
run " arp -d " on PC1 (flush the arp table) and the reply will be
immediately.Or if I run one ping from PC3 to PC2 (PC3 didn't have PC2's
arp entry). When PC3 get reply from PC2 and then the PC1 will also get
reply immediately.
Does any one know what's problem?
The command for adjust forward dely :
/usr/sbin/brctl setbridgeprio mybr 0
/usr/sbin/brctl sethello mybr 1
/usr/sbin/brctl setmaxage mybr 4
/usr/sbin/brctl setfd mybr 4
/usr/sbin/brctl stp mybr on
Two bridge machines are install with linux-2.4.26 and use the ebtables
patch (ebtables-brnf-6-vs-2.4.26).
Network environment:
PC1 --------- Bridge 1 -------- PC2
|----- Bridge 2 ---|
PC3 ----
Very thank for your help
Regards,
Matt.
---------------------------------
Do you Yahoo!?
Win 1 of 4,000 free domain names from Yahoo! Enter now.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.osdl.org/pipermail/bridge/attachments/20040826/5fcdc15b/attachment.htm
