I know this is off topic but... check out the Jouni Malinen's HostAP driver homepage at: http://hostap.epitest.fi It enables the special "HostAP" functionality of the Harris/Intersil Prism 2/2.5/3 chipset which allows your card to act as a full AP (and also do wireless -> ethernet bridging.) Some Atmels work with this driver, YMMV... -Chris ----- Original Message ----- From: "Christoph Kaminski" <mangel@xxxxxx> To: <bridge@xxxxxxxxxxxxxx> Sent: Wednesday, March 17, 2004 9:13 AM Subject: [Bridge] bridge wlan-eth > Hi! > > I have some problems with an bridge between wlan0 and eth0 device... > > It works and I can from both sides ping the router with the bridge device but > I cant ping the devices from other net so I cant ping wlan devs from eth net > and other way around > > the wlan card is an atmel usbw11 from linksys and eth is a intel e100 > 10/100mbit nic > > I have configured the bridge according to the how to and dont see any errors > in kern.log or somewhere else.... > > What is wrong? > > PS: sorry for my english but I hope you can understand what I mean > _______________________________________________ > Bridge mailing list > Bridge@xxxxxxxxxxxxxx > http://lists.osdl.org/mailman/listinfo/bridge
