On Wed, 17 Mar 2004 18:13:58 +0100 Christoph Kaminski <mangel@xxxxxx> wrote: > Hi! > > I have some problems with an bridge between wlan0 and eth0 device... > > It works and I can from both sides ping the router with the bridge device but > I cant ping the devices from other net so I cant ping wlan devs from eth net > and other way around > > the wlan card is an atmel usbw11 from linksys and eth is a intel e100 > 10/100mbit nic > > I have configured the bridge according to the how to and dont see any errors > in kern.log or somewhere else.... > > What is wrong? > > PS: sorry for my english but I hope you can understand what I mean > _______________________________________________ > Bridge mailing list > Bridge@xxxxxxxxxxxxxx > http://lists.osdl.org/mailman/listinfo/bridge More info in bridge FAQ http://bridge.sourceforge.net/faq.html It doesn't work with my Wireless card! This is a known problem, and it is not caused by the bridge code. Many wireless cards don't allow spoofing of the source address. It is a firmware restriction with some chipsets. You might find some information in the bridge mailing list archives to help. -- Stephen Hemminger mailto:shemminger@xxxxxxxx Open Source Development Lab http://developer.osdl.org/shemminger
