Hi Shankari, On Sunday, 29 December 2024 at 19:52:29 Shankari <beingcap11@xxxxxxxxx> wrote: > Hi > > I wanted to provide an update on my recent contributions to the BeaglePlay > project. I have recently started contributing and have been analyzing the > boot time of the init process. Below is the output from the system log: > > debian@BeaglePlay:~$ dmesg | grep "init process" > [ 1.480490] Run /init as init process > > Moving forward, I plan to explore ways to modify the command line and > further investigate the data used for SIG analysis. This will help me gain > a deeper understanding of the boot process and its performance > characteristics. I started the same journey around a week ago, and it's proving a valuable experience. After some trimming, I reached a (reported) init startup time of around 0.6s: root@beagleplay-ti:~# dmesg|grep /sbin [ 0.630046] Run /sbin/init as init process The result above was obtained on a slightly modified 6.12.4 kernel with a custom configuration (I am still thinking about the modifications, as they are a bit unorthodox, but I can share them as well as the defconfig if you are interested). > > Please let me know if you have any suggestions or areas where I could focus > my efforts. In general, I'd suggest to use a recent kernel, as I observed a consistent reduction of boot time between e.g. 6.6.x and 6.12.x. > > Best regards, > > Shankari > Regards, Francesco
