On 04/12/2016 04:42 PM, Nick Gifford wrote: > I have a squashfs filesystem that I want to mount as initrd. I don't > want to use initramfs since the squashfs compresses better. I'm ok > with the wasted RAM since our system is much more constrained by flash > space than RAM. Did we ever hook up initramfs xz compression in the kernel? That really should compress better than squashfs (for the same reason tar compresses better than zip, no need to retain random access capabaility to the data). > I want to mount it from RAM so that the flash partition can be safely > written/upgraded while linux is running with the RAM copy mounted. So you're using a squashfs formatted initrd. > Eventually, I want the linux kernel and the initrd to each have their > own partition (for upgradeability), but right now I'm just copying them > directly into RAM from u-boot and passing the initrd RAM address as the > second arg to bootm. Below is my u-boot environment and console log. Let's see... > Trying to unpack rootfs image as initramfs... > DEBUG unpack_to_rootfs buf=[fe7f9000], len=15958016 > Unable to handle kernel paging request at virtual address fe7f9000 That second line does not exist in the kernel source I have, so I'm guessing that's a debug printf you added. Given that, I don't know if that's the source buffer or the destination buffer, but whatever it is the kernel can't access it. Sounds like your u-boot isn't correctly telling the kernel where to find the blob it loaded? Let's see... > Virtual kernel memory layout: > vector : 0xffff0000 - 0xffff1000 ( 4 kB) > fixmap : 0xffc00000 - 0xffe00000 (2048 kB) > vmalloc : 0xf0000000 - 0xff000000 ( 240 MB) > lowmem : 0xc0000000 - 0xef800000 ( 760 MB) > pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) > modules : 0xbf000000 - 0xbfe00000 ( 14 MB) > .text : 0xc0008000 - 0xc071b584 (7246 kB) > .init : 0xc071c000 - 0xc0756880 ( 235 kB) > .data : 0xc0758000 - 0xc07ae0b8 ( 345 kB) > .bss : 0xc07ae0b8 - 0xc0fb33b8 (8213 kB) It's in the vmalloc space. So presumably destination buffer? > TFTP from server 10.50.4.82; our IP address is 10.50.6.251 > Filename 'urootfs.squashfs'. > Load address: 0x1000000 Your u-boot thinks it loaded the initrd at 0x1000000, which is not mentioned in your printk. Not knowing where you added your printk, I couldn't tell you what variable it corresponds to... > Any help on why I'd be seeing the unhandled paging request? Not without knowing what you've done to your code, no. > I added the "DEBUG: phys to virt addr 3e7f9000 --> fe7f9000" where it > looks like 0xfe7f9000 is being mapped for the initrd in arch/arm/mm/init.c. That's a 790 line file, which contains 45 instances of "initrd" but does not contain the word "buf" so i have no idea what variable you printed out. And it's architecture independent code where it looks like you're having a board-specific problem. Possibly this is the first vmalloc use in the kernel and vmalloc doesn't work on your board, it's hard to tell from here. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-embedded" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
