On Mon, Sep 13, 2010 at 02:07:51PM +0200, Mike Rapoport wrote: > (add LAKLM to CC) >> The problem is now when linux kernel is booting, nothing happens. >> >> --- >> U-Boot> bootm >> ## Booting kernel from Legacy Image at 21000000 ... >> Image Name: Linux-2.6.34.1robin9200v1.0 >> Image Type: ARM Linux Kernel Image (uncompressed) >> Data Size: 1811796 Bytes = 1.7 MiB >> Load Address: 20008000 >> Entry Point: 20008000 >> Verifying Checksum ... OK >> Loading Kernel Image ... OK >> OK >> >> Starting kernel ... >> >> Uncompressing Linux... done, booting the kernel. >> --- >> >> Here is stalls. With my jtag probe I can locate the problem. >> >> --- >>> halt >> target state: halted >> target halted in ARM state due to debug-request, current mode: Supervisor >> cpsr: 0x600000d3 pc: 0xc000af3c >> MMU: enabled, D-Cache: enabled, I-Cache: enabled >>> arm disassemble 0xc000af3c >> 0xc000af3c 0xeafffffe B 0xc000af3c Probably __error. Either your machine isn't supported, or the kernel doesn't recognise your processor. Is your version of uboot sufficiently recent that it passes the correct machine ID in r1 ? -- To unsubscribe from this list: send the line "unsubscribe linux-embedded" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
