Robert Schwebel wrote:
- 2.4 s up from u-boot to the end of "Uncompressing Linux"
- 300 ms until ubifs initialization starts
- 3.7 s for ubifs, until "mounted root"
So we basically have 7 s for the kernel. The rest is userspace, which hasn't
seen much optimization yet, other than trying to start the GUI application as
early as possible, while doing all other init stuff in parallel. Adding "quiet"
brings us another 300 ms.
That's factor 70 away from the 110 ms boot time Tim has talked about some days
ago (and he measured on an ARM cpu which had almost half the speed of this
one), and I'm wondering what we can do to improve the boot time.
2.4s in uncompression? That seems like an obvious target for improvement.
Your kernel seems awfully large. 3104K code? You should definitely find
out what is making it that big and cut out everything you do not need.
You might even try some of the embedded system scripts that rip out all
the printk strings.
If you get the kernel size way down then use a uncompressed kernel and
it should boot a lot faster if the bottleneck is CPU speed.
However, it is probably IO speed. There could be something really wrong
and slow with your MTD. Does it DMA or is it doing something crazy like
using the CPU to read a byte at a time?
Or maybe its cheap and slow flash. In that case I think your only hope
is to make all the code as small as possible and/or find a different
flash filesystem that does not have to read so much of the device to
mount. Perhaps use a read-only compressed filesystem for the system
binaries and reflash it for software upgrades. Only init and mount the
writable flash for user-storable data well after system boot has finished.
--
Zan Lynx
zlynx@xxxxxxx
"Knowledge is Power. Power Corrupts. Study Hard. Be Evil."
--
To unsubscribe from this list: send the line "unsubscribe linux-embedded" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
