From: Ohad Ben-Cohen <ohad@xxxxxxxxxx> Add support to disconnect the pull-up resistor on CD/DAT[3] (pin 1) of the card. This may be desired on certain setups of boards, controllers and embedded sdio devices which do not need the card's pull-up. As a result, card detection is disabled and power is saved. Signed-off-by: Ohad Ben-Cohen <ohad@xxxxxxxxxx> Acked-by: Matt Fleming <matt@xxxxxxxxxxxxxxxxx> --- drivers/mmc/core/sdio.c | 34 ++++++++++++++++++++++++++++++++++ include/linux/mmc/card.h | 3 ++- 2 files changed, 36 insertions(+), 1 deletions(-) diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index fb99ccf..a962946 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -165,6 +165,33 @@ static int sdio_enable_wide(struct mmc_card *card) } /* + * If desired, disconnect the pull-up resistor on CD/DAT[3] (pin 1) + * of the card. This may be required on certain setups of boards, + * controllers and embedded sdio device which do not need the card's + * pull-up. As a result, card detection is disabled and power is saved. + */ +static int sdio_disable_cd(struct mmc_card *card) +{ + int ret; + u8 ctrl; + + if (!card->cccr.disable_cd) + return 0; + + ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl); + if (ret) + return ret; + + ctrl |= SDIO_BUS_CD_DISABLE; + + ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL); + if (ret) + return ret; + + return 0; +} + +/* * Test if the card supports high-speed mode and, if so, switch to it. */ static int sdio_enable_hs(struct mmc_card *card) @@ -392,6 +419,13 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr) goto remove; /* + * If needed, disconnect card detection pull-up resistor. + */ + err = sdio_disable_cd(card); + if (err) + goto remove; + + /* * Initialize (but don't add) all present functions. */ for (i = 0;i < funcs;i++) { diff --git a/include/linux/mmc/card.h b/include/linux/mmc/card.h index 403aa50..82a8488 100644 --- a/include/linux/mmc/card.h +++ b/include/linux/mmc/card.h @@ -62,7 +62,8 @@ struct sdio_cccr { low_speed:1, wide_bus:1, high_power:1, - high_speed:1; + high_speed:1, + disable_cd:1; }; struct sdio_cis { -- 1.5.4.3 -- To unsubscribe from this list: send the line "unsubscribe linux-embedded" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html