Hi Andrew,
On Thu, Jul 23, 2009 at 9:22 AM, Andrew Morton<akpm@xxxxxxxxxxxxxxxxxxxx> wrote:
> I actually already have a little pile of MMC things queued:
Please also consider queuing up the attached patch as well.
The patch is removing the current SDIO cards 1.8V limit, which is
needed for embedded
SDIO devices like TI 127x WLAN devices (with 1.8V MMC controllers like we
have on the ZOOM2 boards for example).
Thank you,
Ohad.
From f9ba45b537dd12fc09443ee29c48860665f8ac82 Mon Sep 17 00:00:00 2001
From: Ohad Ben-Cohen <ohad@xxxxxxxxxxxx>
Date: Wed, 15 Jul 2009 09:21:41 +0300
Subject: [PATCH] sdio: do not ignore MMC_VDD_165_195
This is needed for 1.8V embedded SDIO devices and supporting host controllers
(e.g. TI 127x and ZOOM2 boards)
Signed-off-by: Ohad Ben-Cohen <ohad@xxxxxxxxxxxx>
---
drivers/mmc/core/sdio.c | 7 -------
1 files changed, 0 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
index fb99ccf..6f221dc 100644
--- a/drivers/mmc/core/sdio.c
+++ b/drivers/mmc/core/sdio.c
@@ -275,13 +275,6 @@ int mmc_attach_sdio(struct mmc_host *host, u32 ocr)
ocr &= ~0x7F;
}
- if (ocr & MMC_VDD_165_195) {
- printk(KERN_WARNING "%s: SDIO card claims to support the "
- "incompletely defined 'low voltage range'. This "
- "will be ignored.\n", mmc_hostname(host));
- ocr &= ~MMC_VDD_165_195;
- }
-
host->ocr = mmc_select_voltage(host, ocr);
/*
--
1.5.4.3
