Jaya Kumar wrote:
> Hi friends,
>
> +
> + /* BATCH GPIO OUTPUT */
> +int gpio_set_batch(unsigned gpio, u32 values, u32 bitmask, int maskwidth);
> +
> +The following examples help explain how this function is to be used.
> + Q: How to set gpio pins 0 through 7 to all 0? (8 bits)
> + A: gpio_set_batch(gpio=0, values=0x0, bitmask=0xFF, width=8);
> + Q: How to set gpio pins 58 through 73 to all 1? (16 bits)
> + A: gpio_set_batch(gpio=58, values=0xFFFF, bitmask=0xFFFF, width=16);
> + Q: How to set gpio pins 16 through 47 to 0xCAFEC001? (32 bits)
> + A: gpio_set_batch(gpio=16, values=0xCAFEC001, bitmask=0xFFFFFFFF, width=32);
> +
Can the gpio_set_batch function be used to set non-consecutive gpios?
For example:
gpio_set_batch(0, 0x0, 0x88, 8);
To clear gpios 3 and 7? It looks like the pxa implementation will
support this, but can it be guaranteed for other architectures? If so,
can we put an example in the documentation. If not, can we make it clear
that you shouldn't do this in the documentation. Also , in the latter
case is it necessary to pass the bitmask, since it will just be ((1 <<
bitwidth) - 1)?
~Ryan
--
Bluewater Systems Ltd - ARM Technology Solution Centre
Ryan Mallon Unit 5, Amuri Park
Phone: +64 3 3779127 404 Barbadoes St
Fax: +64 3 3779135 PO Box 13 889
Email: ryan@xxxxxxxxxxxxxxxx Christchurch, 8013
Web: http://www.bluewatersys.com New Zealand
Freecall Australia 1800 148 751 USA 1800 261 2934
--
To unsubscribe from this list: send the line "unsubscribe linux-embedded" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
