Thanks Pawel, It's for a Sigma SMP8634 (MIPS 4KEc) chipset. In the meantime we got it working. And yes, no special driver is needed for it. Regards, Robert -- Robert Berger Embedded Software Specialist Reliable Embedded Systems Consulting Training Engineering Tel.: (+30) 697 593 3428 Fax.:(+30 210) 684 7881 URL: http://www.reliableembeddedsystems.com -- ...If you've found 3 bugs in a program, best estimate is that there are 3 more.-Jack Ganssle On Wed, 17 Sep 2008 18:29:04 -0400, "Pawel Pastuszak" <pawelpastuszak@xxxxxxxxx> wrote: > You don't need any driver for the 88E6063 it uses phy id to talk to > all its ports.. so all you have to do is make sure you set up your > board to not to bind to any phy address then you can uses it as a > switch.. > > Which Processor is this for...I created couple tool for the marvell > switch i uses 3 different type in that family of switch's > > Pawel -- To unsubscribe from this list: send the line "unsubscribe linux-embedded" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
