[PATCH] efi/cper: Print correctable AER information

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Yazen Ghannam <yazen.ghannam@xxxxxxx>

Currently, cper_print_pcie() only logs Uncorrectable Error Status, Mask
and Severity registers along with the TLP header.

If a correctable error is received immediately preceding or following an
Uncorrectable Fatal Error, its information is lost since Correctable
Error Status and Mask registers are not logged.

As such, to avoid skipping any possible error information, Correctable
Error Status and Mask registers should also be logged.

Additionally, ensure that AER information is also available through
cper_print_pcie() for Correctable and Uncorrectable Non-Fatal Errors.

Signed-off-by: Yazen Ghannam <yazen.ghannam@xxxxxxx>
Tested-by: Avadhut Naik <avadhut.naik@xxxxxxx>
Signed-off-by: Avadhut Naik <avadhut.naik@xxxxxxx>
---
 drivers/firmware/efi/cper.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
index 7d2cdd9e2227..b69e68ef3f02 100644
--- a/drivers/firmware/efi/cper.c
+++ b/drivers/firmware/efi/cper.c
@@ -434,12 +434,17 @@ static void cper_print_pcie(const char *pfx, const struct cper_sec_pcie *pcie,
 	"%s""bridge: secondary_status: 0x%04x, control: 0x%04x\n",
 	pfx, pcie->bridge.secondary_status, pcie->bridge.control);
 
-	/* Fatal errors call __ghes_panic() before AER handler prints this */
-	if ((pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) &&
-	    (gdata->error_severity & CPER_SEV_FATAL)) {
+	/*
+	 * Print all valid AER info. Record may be from BERT (boot-time) or GHES (run-time).
+	 *
+	 * Fatal errors call __ghes_panic() before AER handler prints this.
+	 */
+	if (pcie->validation_bits & CPER_PCIE_VALID_AER_INFO) {
 		struct aer_capability_regs *aer;
 
 		aer = (struct aer_capability_regs *)pcie->aer_info;
+		printk("%saer_cor_status: 0x%08x, aer_cor_mask: 0x%08x\n",
+		       pfx, aer->cor_status, aer->cor_mask);
 		printk("%saer_uncor_status: 0x%08x, aer_uncor_mask: 0x%08x\n",
 		       pfx, aer->uncor_status, aer->uncor_mask);
 		printk("%saer_uncor_severity: 0x%08x\n",

base-commit: fdf969bbceb389f5a7c69e226daf2cb724ea66ba
-- 
2.34.1





[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux