Doing it that way allows setting up stricter memory attributes,
simplifies boot code path and removes potential relocation
of kernel image.
Wire up required interfaces and minimally initialize zero page
fields needed for it to function correctly.
Signed-off-by: Evgeniy Baskov <baskov@xxxxxxxxx>
---
arch/x86/boot/compressed/head_32.S | 40 +++-
arch/x86/boot/compressed/head_64.S | 58 ++++-
drivers/firmware/efi/Kconfig | 2 +
drivers/firmware/efi/libstub/Makefile | 2 +-
.../firmware/efi/libstub/x86-extract-direct.c | 217 ++++++++++++++++++
drivers/firmware/efi/libstub/x86-stub.c | 119 +---------
drivers/firmware/efi/libstub/x86-stub.h | 14 ++
7 files changed, 337 insertions(+), 115 deletions(-)
create mode 100644 drivers/firmware/efi/libstub/x86-extract-direct.c
create mode 100644 drivers/firmware/efi/libstub/x86-stub.h
diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S
index 15545781ea48..49df36f78b62 100644
--- a/arch/x86/boot/compressed/head_32.S
+++ b/arch/x86/boot/compressed/head_32.S
@@ -152,11 +152,47 @@ SYM_FUNC_END(startup_32)
#ifdef CONFIG_EFI_STUB
SYM_FUNC_START(efi32_stub_entry)
+
+ /* Clear BSS */
+ call 1f
+1: popl %ebx
+ xorl %eax, %eax
+ leal (_bss - 1b)(%ebx), %edi
+ leal (_ebss - 1b)(%ebx), %ecx
+ sub %edi, %ecx
+ shrl $2, %ecx
+ rep stosl
+
add $0x4, %esp
movl 8(%esp), %esi /* save boot_params pointer */
call efi_main
- /* efi_main returns the possibly relocated address of startup_32 */
- jmp *%eax
+ movl %eax, %ecx
+
+ /*
+ * efi_main returns the possibly
+ * relocated address of extracted kernel entry point.
+ */
+
+ cli
+
+ /* Load new GDT */
+ leal (gdt - 1b)(%ebx), %eax
+ movl %eax, 2(%eax)
+ lgdt (%eax)
+
+ /* Load segment registers with our descriptors */
+ movl $__BOOT_DS, %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %fs
+ movl %eax, %gs
+ movl %eax, %ss
+
+ /* Zero EFLAGS */
+ pushl $0
+ popfl
+
+ jmp *%ecx
SYM_FUNC_END(efi32_stub_entry)
SYM_FUNC_ALIAS(efi_stub_entry, efi32_stub_entry)
#endif
diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S
index 8af7835de3b1..554015d21950 100644
--- a/arch/x86/boot/compressed/head_64.S
+++ b/arch/x86/boot/compressed/head_64.S
@@ -529,12 +529,64 @@ SYM_CODE_END(startup_64)
.org 0x390
#endif
SYM_FUNC_START(efi64_stub_entry)
+ /* Preserve first parameter */
+ movq %rdi, %r10
+
+ /* Clear BSS */
+ xorl %eax, %eax
+ leaq _bss(%rip), %rdi
+ leaq _ebss(%rip), %rcx
+ subq %rdi, %rcx
+ shrq $3, %rcx
+ rep stosq
+
and $~0xf, %rsp /* realign the stack */
movq %rdx, %rbx /* save boot_params pointer */
+ movq %r10, %rdi
call efi_main
- movq %rbx,%rsi
- leaq rva(startup_64)(%rax), %rax
- jmp *%rax
+
+ cld
+ cli
+
+ movq %rbx, %rdi /* boot_params */
+ movq %rax, %rsi /* decompressed kernel address */
+
+ /* Make sure we have GDT with 32-bit code segment */
+ leaq gdt64(%rip), %rax
+ addq %rax, 2(%rax)
+ lgdt (%rax)
+
+ /* Setup data segments. */
+ xorl %eax, %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %ss
+ movl %eax, %fs
+ movl %eax, %gs
+
+ pushq %rsi
+ pushq %rdi
+
+ call load_stage1_idt
+ call enable_nx_if_supported
+
+ call trampoline_pgtable_init
+ movq %rax, %rdx
+
+
+ /* Swap %rsi and %rsi */
+ popq %rsi
+ popq %rdi
+
+ /* Save the trampoline address in RCX */
+ movq trampoline_32bit(%rip), %rcx
+
+ /* Switch to compatibility mode (CS.L = 0 CS.D = 1) via far return */
+ pushq $__KERNEL32_CS
+ leaq TRAMPOLINE_32BIT_CODE_OFFSET(%rcx), %rax
+ pushq %rax
+ lretq
+
SYM_FUNC_END(efi64_stub_entry)
SYM_FUNC_ALIAS(efi_stub_entry, efi64_stub_entry)
#endif
diff --git a/drivers/firmware/efi/Kconfig b/drivers/firmware/efi/Kconfig
index 043ca31c114e..dc833ca6375b 100644
--- a/drivers/firmware/efi/Kconfig
+++ b/drivers/firmware/efi/Kconfig
@@ -58,6 +58,8 @@ config EFI_DXE_MEM_ATTRIBUTES
Use DXE services to check and alter memory protection
attributes during boot via EFISTUB to ensure that memory
ranges used by the kernel are writable and executable.
+ This option also enables stricter memory attributes
+ on compressed kernel PE images.
config EFI_PARAMS_FROM_FDT
bool
diff --git a/drivers/firmware/efi/libstub/Makefile b/drivers/firmware/efi/libstub/Makefile
index 80d85a5169fb..53ad6ef27cb3 100644
--- a/drivers/firmware/efi/libstub/Makefile
+++ b/drivers/firmware/efi/libstub/Makefile
@@ -88,7 +88,7 @@ lib-$(CONFIG_EFI_GENERIC_STUB) += efi-stub.o string.o intrinsics.o systable.o \
lib-$(CONFIG_ARM) += arm32-stub.o
lib-$(CONFIG_ARM64) += arm64.o arm64-stub.o smbios.o
-lib-$(CONFIG_X86) += x86-stub.o
+lib-$(CONFIG_X86) += x86-stub.o x86-extract-direct.o
lib-$(CONFIG_RISCV) += riscv.o riscv-stub.o
lib-$(CONFIG_LOONGARCH) += loongarch.o loongarch-stub.o
diff --git a/drivers/firmware/efi/libstub/x86-extract-direct.c b/drivers/firmware/efi/libstub/x86-extract-direct.c
new file mode 100644
index 000000000000..40c56f94428d
--- /dev/null
+++ b/drivers/firmware/efi/libstub/x86-extract-direct.c
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/acpi.h>
+#include <linux/efi.h>
+#include <linux/elf.h>
+#include <linux/stddef.h>
+
+#include <asm/efi.h>
+#include <asm/e820/types.h>
+#include <asm/desc.h>
+#include <asm/boot.h>
+#include <asm/bootparam_utils.h>
+#include <asm/shared/extract.h>
+#include <asm/shared/pgtable.h>
+
+#include "efistub.h"
+#include "x86-stub.h"
+
+static efi_handle_t image_handle;
+
+static void do_puthex(unsigned long value)
+{
+ efi_printk("%08lx", value);
+}
+
+static void do_putstr(const char *msg)
+{
+ efi_printk("%s", msg);
+}
+
+static unsigned long do_map_range(unsigned long start,
+ unsigned long end,
+ unsigned int flags)
+{
+ efi_status_t status;
+ unsigned long size = end - start;
+
+ /*
+ * When the address for the kernel extraction is selected buffer
+ * should be allocated using UEFI services, since we have not yet
+ * exited boot services at this stage. This is performed by calling
+ * this function with MAP_ALLOC flag.
+ */
+
+ if (flags & MAP_ALLOC) {
+ unsigned long addr;
+
+ status = efi_low_alloc_above(size, CONFIG_PHYSICAL_ALIGN,
+ &addr, start);
+ if (status != EFI_SUCCESS) {
+ efi_err("Unable to allocate memory for uncompressed kernel");
+ efi_exit(image_handle, EFI_OUT_OF_RESOURCES);
+ }
+
+ if (start != addr) {
+ efi_debug("Unable to allocate at given address"
+ " (desired=0x%lx, actual=0x%lx)",
+ (unsigned long)start, addr);
+ start = addr;
+ }
+ }
+
+ if ((flags & (MAP_PROTECT | MAP_ALLOC)) &&
+ IS_ENABLED(CONFIG_EFI_DXE_MEM_ATTRIBUTES)) {
+ unsigned long attr = 0;
+
+ if (!(flags & MAP_EXEC))
+ attr |= EFI_MEMORY_XP;
+
+ if (!(flags & MAP_WRITE))
+ attr |= EFI_MEMORY_RO;
+
+ status = efi_adjust_memory_range_protection(start, size, attr);
+ if (status != EFI_SUCCESS)
+ efi_err("Unable to protect memory range");
+ }
+
+ return start;
+}
+
+/*
+ * Trampoline takes 3 pages and can be loaded in first megabyte of memory
+ * with its end placed between 0 and 640k where BIOS might start.
+ * (see arch/x86/boot/compressed/pgtable_64.c)
+ */
+
+#ifdef CONFIG_64BIT
+static efi_status_t prepare_trampoline(void)
+{
+ efi_status_t status;
+ unsigned long trampoline_start;
+ void *caddr;
+
+ status = efi_allocate_pages(TRAMPOLINE_32BIT_SIZE,
+ (unsigned long *)&trampoline_32bit,
+ TRAMPOLINE_32BIT_PLACEMENT_MAX);
+
+ if (status != EFI_SUCCESS)
+ return status;
+
+ trampoline_start = (unsigned long)trampoline_32bit;
+
+ memset(trampoline_32bit, 0, TRAMPOLINE_32BIT_SIZE);
+
+ if (IS_ENABLED(CONFIG_EFI_DXE_MEM_ATTRIBUTES)) {
+ /* First page of trampoline is a top level page table */
+ efi_adjust_memory_range_protection(trampoline_start,
+ PAGE_SIZE,
+ EFI_MEMORY_XP);
+ }
+
+ /* Second page of trampoline is the code (with a padding) */
+
+ caddr = (void *)trampoline_32bit + TRAMPOLINE_32BIT_CODE_OFFSET;
+
+ memcpy(caddr, trampoline_32bit_src, TRAMPOLINE_32BIT_CODE_SIZE);
+
+ if (IS_ENABLED(CONFIG_EFI_DXE_MEM_ATTRIBUTES)) {
+ efi_adjust_memory_range_protection((unsigned long)caddr,
+ PAGE_SIZE,
+ EFI_MEMORY_RO);
+
+ /* And the last page of trampoline is the stack */
+
+ efi_adjust_memory_range_protection(trampoline_start + 2 * PAGE_SIZE,
+ PAGE_SIZE,
+ EFI_MEMORY_XP);
+ }
+
+ return EFI_SUCCESS;
+}
+#else
+static inline efi_status_t prepare_trampoline(void)
+{
+ return EFI_SUCCESS;
+}
+#endif
+
+static efi_status_t init_loader_data(efi_handle_t handle,
+ struct boot_params *params,
+ struct efi_boot_memmap **map)
+{
+ struct efi_info *efi = (void *)¶ms->efi_info;
+ efi_status_t status;
+ const char *signature;
+
+ status = efi_get_memory_map(map, false);
+
+ if (status != EFI_SUCCESS) {
+ efi_err("Unable to get EFI memory map...\n");
+ return status;
+ }
+
+ signature = efi_is_64bit() ? EFI64_LOADER_SIGNATURE
+ : EFI32_LOADER_SIGNATURE;
+
+ memcpy(&efi->efi_loader_signature, signature, sizeof(__u32));
+
+ efi->efi_memdesc_size = (*map)->desc_size;
+ efi->efi_memdesc_version = (*map)->desc_ver;
+ efi->efi_memmap_size = (*map)->map_size;
+
+ efi_set_u64_split((unsigned long)(*map)->map,
+ &efi->efi_memmap, &efi->efi_memmap_hi);
+
+ efi_set_u64_split((unsigned long)efi_system_table,
+ &efi->efi_systab, &efi->efi_systab_hi);
+
+ image_handle = handle;
+
+ return EFI_SUCCESS;
+}
+
+static void free_loader_data(struct boot_params *params, struct efi_boot_memmap *map)
+{
+ struct efi_info *efi = (void *)¶ms->efi_info;
+
+ efi_bs_call(free_pool, map);
+
+ efi->efi_memdesc_size = 0;
+ efi->efi_memdesc_version = 0;
+ efi->efi_memmap_size = 0;
+ efi_set_u64_split(0, &efi->efi_memmap, &efi->efi_memmap_hi);
+}
+
+extern unsigned char input_data[];
+extern unsigned int input_len, output_len;
+
+unsigned long extract_kernel_direct(efi_handle_t handle, struct boot_params *params)
+{
+
+ struct efi_extract_callbacks cb = { 0 };
+ struct efi_boot_memmap *map = NULL;
+ efi_status_t status;
+ void *res;
+
+ status = prepare_trampoline();
+
+ if (status != EFI_SUCCESS)
+ return 0;
+
+ /* Prepare environment for do_extract_kernel() call */
+ status = init_loader_data(handle, params, &map);
+
+ if (status != EFI_SUCCESS)
+ return 0;
+
+ cb.puthex = do_puthex;
+ cb.putstr = do_putstr;
+ cb.map_range = do_map_range;
+
+ res = efi_extract_kernel(params, &cb, input_data, input_len, output_len);
+
+ free_loader_data(params, map);
+
+ return (unsigned long)res;
+}
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index 7fb1eff88a18..1d1ab1911fd3 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -17,6 +17,7 @@
#include <asm/boot.h>
#include "efistub.h"
+#include "x86-stub.h"
/* Maximum physical address for 64-bit kernel with 4-level paging */
#define MAXMEM_X86_64_4LEVEL (1ull << 46)
@@ -24,7 +25,7 @@
const efi_system_table_t *efi_system_table;
const efi_dxe_services_table_t *efi_dxe_table;
u32 image_offset __section(".data");
-static efi_loaded_image_t *image = NULL;
+static efi_loaded_image_t *image __section(".data");
static efi_status_t
preserve_pci_rom_image(efi_pci_io_protocol_t *pci, struct pci_setup_rom **__rom)
@@ -212,55 +213,9 @@ static void retrieve_apple_device_properties(struct boot_params *boot_params)
}
}
-/*
- * Trampoline takes 2 pages and can be loaded in first megabyte of memory
- * with its end placed between 128k and 640k where BIOS might start.
- * (see arch/x86/boot/compressed/pgtable_64.c)
- *
- * We cannot find exact trampoline placement since memory map
- * can be modified by UEFI, and it can alter the computed address.
- */
-
-#define TRAMPOLINE_PLACEMENT_BASE ((128 - 8)*1024)
-#define TRAMPOLINE_PLACEMENT_SIZE (640*1024 - (128 - 8)*1024)
-
-void startup_32(struct boot_params *boot_params);
-
-static void
-setup_memory_protection(unsigned long image_base, unsigned long image_size)
-{
- /*
- * Allow execution of possible trampoline used
- * for switching between 4- and 5-level page tables
- * and relocated kernel image.
- */
-
- efi_adjust_memory_range_protection(TRAMPOLINE_PLACEMENT_BASE,
- TRAMPOLINE_PLACEMENT_SIZE, 0);
-
-#ifdef CONFIG_64BIT
- if (image_base != (unsigned long)startup_32)
- efi_adjust_memory_range_protection(image_base, image_size, 0);
-#else
- /*
- * Clear protection flags on a whole range of possible
- * addresses used for KASLR. We don't need to do that
- * on x86_64, since KASLR/extraction is performed after
- * dedicated identity page tables are built and we only
- * need to remove possible protection on relocated image
- * itself disregarding further relocations.
- */
- efi_adjust_memory_range_protection(LOAD_PHYSICAL_ADDR,
- KERNEL_IMAGE_SIZE - LOAD_PHYSICAL_ADDR,
- 0);
-#endif
-}
-
static const efi_char16_t apple[] = L"Apple";
-static void setup_quirks(struct boot_params *boot_params,
- unsigned long image_base,
- unsigned long image_size)
+static void setup_quirks(struct boot_params *boot_params)
{
efi_char16_t *fw_vendor = (efi_char16_t *)(unsigned long)
efi_table_attr(efi_system_table, fw_vendor);
@@ -269,9 +224,6 @@ static void setup_quirks(struct boot_params *boot_params,
if (IS_ENABLED(CONFIG_APPLE_PROPERTIES))
retrieve_apple_device_properties(boot_params);
}
-
- if (IS_ENABLED(CONFIG_EFI_DXE_MEM_ATTRIBUTES))
- setup_memory_protection(image_base, image_size);
}
/*
@@ -384,7 +336,7 @@ static void setup_graphics(struct boot_params *boot_params)
}
-static void __noreturn efi_exit(efi_handle_t handle, efi_status_t status)
+void __noreturn efi_exit(efi_handle_t handle, efi_status_t status)
{
efi_bs_call(exit, handle, status, 0, NULL);
for(;;)
@@ -707,8 +659,7 @@ static efi_status_t exit_boot(struct boot_params *boot_params, void *handle)
}
/*
- * On success, we return the address of startup_32, which has potentially been
- * relocated by efi_relocate_kernel.
+ * On success, we return extracted kernel entry point.
* On failure, we exit to the firmware via efi_exit instead of returning.
*/
asmlinkage unsigned long efi_main(efi_handle_t handle,
@@ -733,60 +684,6 @@ asmlinkage unsigned long efi_main(efi_handle_t handle,
efi_dxe_table = NULL;
}
- /*
- * If the kernel isn't already loaded at a suitable address,
- * relocate it.
- *
- * It must be loaded above LOAD_PHYSICAL_ADDR.
- *
- * The maximum address for 64-bit is 1 << 46 for 4-level paging. This
- * is defined as the macro MAXMEM, but unfortunately that is not a
- * compile-time constant if 5-level paging is configured, so we instead
- * define our own macro for use here.
- *
- * For 32-bit, the maximum address is complicated to figure out, for
- * now use KERNEL_IMAGE_SIZE, which will be 512MiB, the same as what
- * KASLR uses.
- *
- * Also relocate it if image_offset is zero, i.e. the kernel wasn't
- * loaded by LoadImage, but rather by a bootloader that called the
- * handover entry. The reason we must always relocate in this case is
- * to handle the case of systemd-boot booting a unified kernel image,
- * which is a PE executable that contains the bzImage and an initrd as
- * COFF sections. The initrd section is placed after the bzImage
- * without ensuring that there are at least init_size bytes available
- * for the bzImage, and thus the compressed kernel's startup code may
- * overwrite the initrd unless it is moved out of the way.
- */
-
- buffer_start = ALIGN(bzimage_addr - image_offset,
- hdr->kernel_alignment);
- buffer_end = buffer_start + hdr->init_size;
-
- if ((buffer_start < LOAD_PHYSICAL_ADDR) ||
- (IS_ENABLED(CONFIG_X86_32) && buffer_end > KERNEL_IMAGE_SIZE) ||
- (IS_ENABLED(CONFIG_X86_64) && buffer_end > MAXMEM_X86_64_4LEVEL) ||
- (image_offset == 0)) {
- extern char _bss[];
-
- status = efi_relocate_kernel(&bzimage_addr,
- (unsigned long)_bss - bzimage_addr,
- hdr->init_size,
- hdr->pref_address,
- hdr->kernel_alignment,
- LOAD_PHYSICAL_ADDR);
- if (status != EFI_SUCCESS) {
- efi_err("efi_relocate_kernel() failed!\n");
- goto fail;
- }
- /*
- * Now that we've copied the kernel elsewhere, we no longer
- * have a set up block before startup_32(), so reset image_offset
- * to zero in case it was set earlier.
- */
- image_offset = 0;
- }
-
#ifdef CONFIG_CMDLINE_BOOL
status = efi_parse_options(CONFIG_CMDLINE);
if (status != EFI_SUCCESS) {
@@ -843,7 +740,11 @@ asmlinkage unsigned long efi_main(efi_handle_t handle,
setup_efi_pci(boot_params);
- setup_quirks(boot_params, bzimage_addr, buffer_end - buffer_start);
+ setup_quirks(boot_params);
+
+ bzimage_addr = extract_kernel_direct(handle, boot_params);
+ if (!bzimage_addr)
+ goto fail;
status = exit_boot(boot_params, handle);
if (status != EFI_SUCCESS) {
diff --git a/drivers/firmware/efi/libstub/x86-stub.h b/drivers/firmware/efi/libstub/x86-stub.h
new file mode 100644
index 000000000000..baecc7c6e602
--- /dev/null
+++ b/drivers/firmware/efi/libstub/x86-stub.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _DRIVERS_FIRMWARE_EFI_X86STUB_H
+#define _DRIVERS_FIRMWARE_EFI_X86STUB_H
+
+#include <linux/efi.h>
+
+#include <asm/bootparam.h>
+
+void __noreturn efi_exit(efi_handle_t handle, efi_status_t status);
+unsigned long extract_kernel_direct(efi_handle_t handle, struct boot_params *boot_params);
+void startup_32(struct boot_params *boot_params);
+
+#endif
--
2.39.2
