On Mon, Oct 03, 2022 at 07:04:02PM +0200, Marek Marczykowski-Górecki wrote:
> On Mon, Oct 03, 2022 at 06:37:19PM +0200, Ard Biesheuvel wrote:
> > On Mon, 3 Oct 2022 at 18:23, Demi Marie Obenour
> > <demi@xxxxxxxxxxxxxxxxxxxxxx> wrote:
> > >
> > > On Mon, Oct 03, 2022 at 05:59:52PM +0200, Ard Biesheuvel wrote:
> > > > On Mon, 3 Oct 2022 at 17:29, Demi Marie Obenour
> > > > <demi@xxxxxxxxxxxxxxxxxxxxxx> wrote:
> > > > >
> > > > > On Mon, Oct 03, 2022 at 01:26:24PM +0200, Ard Biesheuvel wrote:
> > > > > > Xen on x86 boots dom0 in EFI mode but without providing a memory map.
> > > > > > This means that some sanity checks we would like to perform on
> > > > > > configuration tables or other data structures in memory are not
> > > > > > currently possible. Xen does, however, expose EFI memory descriptor info
> > > > > > via a Xen hypercall, so let's wire that up instead.
> > > > > >
> > > > > > Co-developed-by: Demi Marie Obenour <demi@xxxxxxxxxxxxxxxxxxxxxx>
> > > > > > Signed-off-by: Demi Marie Obenour <demi@xxxxxxxxxxxxxxxxxxxxxx>
> > > > > > Signed-off-by: Ard Biesheuvel <ardb@xxxxxxxxxx>
> > > > > > ---
> > > > > > drivers/firmware/efi/efi.c | 5 ++-
> > > > > > drivers/xen/efi.c | 34 ++++++++++++++++++++
> > > > > > include/linux/efi.h | 1 +
> > > > > > 3 files changed, 39 insertions(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/drivers/firmware/efi/efi.c b/drivers/firmware/efi/efi.c
> > > > > > index 55bd3f4aab28..2c12b1a06481 100644
> > > > > > --- a/drivers/firmware/efi/efi.c
> > > > > > +++ b/drivers/firmware/efi/efi.c
> > > > > > @@ -456,7 +456,7 @@ void __init efi_find_mirror(void)
> > > > > > * and if so, populate the supplied memory descriptor with the appropriate
> > > > > > * data.
> > > > > > */
> > > > > > -int efi_mem_desc_lookup(u64 phys_addr, efi_memory_desc_t *out_md)
> > > > > > +int __efi_mem_desc_lookup(u64 phys_addr, efi_memory_desc_t *out_md)
> > > > > > {
> > > > > > efi_memory_desc_t *md;
> > > > > >
> > > > > > @@ -485,6 +485,9 @@ int efi_mem_desc_lookup(u64 phys_addr, efi_memory_desc_t *out_md)
> > > > > > return -ENOENT;
> > > > > > }
> > > > > >
> > > > > > +extern int efi_mem_desc_lookup(u64 phys_addr, efi_memory_desc_t *out_md)
> > > > > > + __weak __alias(__efi_mem_desc_lookup);
> > > > > > +
> > > > > > /*
> > > > > > * Calculate the highest address of an efi memory descriptor.
> > > > > > */
> > > > > > diff --git a/drivers/xen/efi.c b/drivers/xen/efi.c
> > > > > > index d1ff2186ebb4..74f3f6d8cdc8 100644
> > > > > > --- a/drivers/xen/efi.c
> > > > > > +++ b/drivers/xen/efi.c
> > > > > > @@ -26,6 +26,7 @@
> > > > > >
> > > > > > #include <xen/interface/xen.h>
> > > > > > #include <xen/interface/platform.h>
> > > > > > +#include <xen/page.h>
> > > > > > #include <xen/xen.h>
> > > > > > #include <xen/xen-ops.h>
> > > > > >
> > > > > > @@ -292,3 +293,36 @@ void __init xen_efi_runtime_setup(void)
> > > > > > efi.get_next_high_mono_count = xen_efi_get_next_high_mono_count;
> > > > > > efi.reset_system = xen_efi_reset_system;
> > > > > > }
> > > > > > +
> > > > > > +int efi_mem_desc_lookup(u64 phys_addr, efi_memory_desc_t *out_md)
> > > > > > +{
> > > > > > + static_assert(XEN_PAGE_SHIFT == EFI_PAGE_SHIFT,
> > > > > > + "Mismatch between EFI_PAGE_SHIFT and XEN_PAGE_SHIFT");
> > > > > > + struct xen_platform_op op = {
> > > > > > + .cmd = XENPF_firmware_info,
> > > > > > + .u.firmware_info = {
> > > > > > + .type = XEN_FW_EFI_INFO,
> > > > > > + .index = XEN_FW_EFI_MEM_INFO,
> > > > > > + .u.efi_info.mem.addr = phys_addr,
> > > > > > + .u.efi_info.mem.size = U64_MAX - phys_addr,
> > > > > > + }
> > > > > > + };
> > > > > > + union xenpf_efi_info *info = &op.u.firmware_info.u.efi_info;
> > > > > > + int rc;
> > > > > > +
> > > > > > + if (!efi_enabled(EFI_PARAVIRT) || efi_enabled(EFI_MEMMAP))
> > > > > > + return __efi_mem_desc_lookup(phys_addr, out_md);
> > > > > > +
> > > > > > + rc = HYPERVISOR_platform_op(&op);
> > > > > > + if (rc) {
> > > > > > + pr_warn("Failed to lookup header 0x%llx in Xen memory map: error %d\n",
> > > > > > + phys_addr, rc);
> > > > > > + }
> > > > > > +
> > > > > > + out_md->phys_addr = info->mem.addr;
> > > > >
> > > > > This will be equal to phys_addr, not the actual start of the memory
> > > > > region.
> > > > >
> > > > > > + out_md->num_pages = info->mem.size >> EFI_PAGE_SHIFT;
> > > > >
> > > > > Similarly, this will be the number of bytes in the memory region
> > > > > after phys_addr, not the total number of bytes in the region. These two
> > > > > differences mean that this function is not strictly equivalent to the
> > > > > original efi_mem_desc_lookup().
> > > > >
> > > > > I am not sure if this matters in practice, but I thought you would want
> > > > > to be aware of it.
> > > >
> > > > This is a bit disappointing. Is there no way to obtain this
> > > > information via a Xen hypercall?
> > >
> > > It is possible, but doing so is very complex (it essentially requires a
> > > binary search). This really should be fixed on the Xen side.
> > >
> > > > In any case, it means we'll need to round down phys_addr to page size
> > > > at the very least.
> > >
> > > That makes sense. Are there any callers that will be broken even with
> > > this rounding?
> >
> > As far as I can tell, it should work fine. The only thing to double
> > check is whether we are not creating spurious error messages from
> > efi_arch_mem_reserve() this way, but as far as I can tell, that should
> > be fine too.
> >
> > Is there anyone at your end that can give this a spin on an actual
> > Xen/x86 system?
>
> Demi, if you open a PR with this at
> https://github.com/QubesOS/qubes-linux-kernel/pulls, I can run it
> through our CI - (at least) one of the machines has ESRT table.
Done: https://github.com/QubesOS/qubes-linux-kernel/pull/681
> AFAIR your test laptop has it too.
It does; I plan to test a version that has the needed rounding.
--
Sincerely,
Demi Marie Obenour (she/her/hers)
Invisible Things Lab
Attachment:
signature.asc
Description: PGP signature
