Re: Re: Re: [PATCH v5 8/8] loongarch: efi: enable generic EFI compressed boot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Ard,


> -----原始邮件-----
> 发件人: "Ard Biesheuvel" <ardb@xxxxxxxxxx>
> 发送时间:2022-09-12 18:18:05 (星期一)
> 收件人: "陈华才" <chenhuacai@xxxxxxxxxxx>
> 抄送: linux-efi@xxxxxxxxxxxxxxx, linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, "James E.J. Bottomley" <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>, "Matthew Garrett" <mjg59@xxxxxxxxxxxxx>, "Peter Jones" <pjones@xxxxxxxxxx>, "Ilias Apalodimas" <ilias.apalodimas@xxxxxxxxxx>, "Heinrich Schuchardt" <heinrich.schuchardt@xxxxxxxxxxxxx>, "AKASHI Takahiro" <takahiro.akashi@xxxxxxxxxx>, "Palmer Dabbelt" <palmer@xxxxxxxxxxx>, "Atish Patra" <atishp@xxxxxxxxxxxxxx>, "Arnd Bergmann" <arnd@xxxxxxxx>, "Xi Ruoyao" <xry111@xxxxxxxxxxx>, "Lennart Poettering" <lennart@xxxxxxxxxxxxxx>, "Jeremy Linton" <jeremy.linton@xxxxxxx>, "Will Deacon" <will@xxxxxxxxxx>, "Catalin Marinas" <catalin.marinas@xxxxxxx>
> 主题: Re: Re: [PATCH v5 8/8] loongarch: efi: enable generic EFI compressed boot
> 
> On Sun, 11 Sept 2022 at 16:03, 陈华才 <chenhuacai@xxxxxxxxxxx> wrote:
> >
> >
> >
> >
> > > -----原始邮件-----
> > > 发件人: "Ard Biesheuvel" <ardb@xxxxxxxxxx>
> > > 发送时间:2022-09-10 22:28:04 (星期六)
> > > 收件人: "陈华才" <chenhuacai@xxxxxxxxxxx>
> > > 抄送: linux-efi@xxxxxxxxxxxxxxx, linux-arm-kernel@xxxxxxxxxxxxxxxxxxx, linux-kernel@xxxxxxxxxxxxxxx, "James E.J. Bottomley" <James.Bottomley@xxxxxxxxxxxxxxxxxxxxx>, "Matthew Garrett" <mjg59@xxxxxxxxxxxxx>, "Peter Jones" <pjones@xxxxxxxxxx>, "Ilias Apalodimas" <ilias.apalodimas@xxxxxxxxxx>, "Heinrich Schuchardt" <heinrich.schuchardt@xxxxxxxxxxxxx>, "AKASHI Takahiro" <takahiro.akashi@xxxxxxxxxx>, "Palmer Dabbelt" <palmer@xxxxxxxxxxx>, "Atish Patra" <atishp@xxxxxxxxxxxxxx>, "Arnd Bergmann" <arnd@xxxxxxxx>, "Xi Ruoyao" <xry111@xxxxxxxxxxx>, "Lennart Poettering" <lennart@xxxxxxxxxxxxxx>, "Jeremy Linton" <jeremy.linton@xxxxxxx>, "Will Deacon" <will@xxxxxxxxxx>, "Catalin Marinas" <catalin.marinas@xxxxxxx>
> > > 主题: Re: [PATCH v5 8/8] loongarch: efi: enable generic EFI compressed boot
> > >
> > > On Sat, 10 Sept 2022 at 15:22, 陈华才 <chenhuacai@xxxxxxxxxxx> wrote:
> > > >
> > > > Hi, Ard,
> > > >
> > > > I prefer to give a chance to disable ZBOOT, so I don't want to select EFI_ZBOOT unconditionally in Kconfig, and then the Makefile can be like this:
> > > > diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
> > > > index c3f579bdf9e5..bc6fe65125f5 100644
> > > > --- a/arch/loongarch/Makefile
> > > > +++ b/arch/loongarch/Makefile
> > > > @@ -14,6 +14,10 @@ else
> > > >  KBUILD_IMAGE   := $(boot)/vmlinux.efi
> > > >  endif
> > > >
> > > > +ifdef CONFIG_EFI_ZBOOT
> > > > +KBUILD_IMAGE    := $(boot)/vmlinuz.efi
> > > > +endif
> > > > +
> > > >  archscripts: scripts_basic
> > > >         $(Q)$(MAKE) $(build)=arch/loongarch/boot/tools relocs
> > > >
> > >
> > > OK, I will fold this in. This actually aligns it with the other
> > > architectures, so I prefer this approach as well.
> >
> > Thank you, and if "make install" can also handle the zboot case, that's even better. :)
> >
> > diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
> > index c3f579bdf9e5..5480fe2de7cd 100644
> > --- a/arch/loongarch/Makefile
> > +++ b/arch/loongarch/Makefile
> > @@ -137,7 +137,11 @@ vmlinux.elf vmlinux.efi vmlinuz.efi: vmlinux
> >  core-y += arch/loongarch/boot/dts/
> >
> >  install:
> > +ifndef CONFIG_EFI_ZBOOT
> >         $(Q)install -D -m 755 $(KBUILD_IMAGE) $(INSTALL_PATH)/vmlinux-$(KERNELRELEASE)
> > +else
> > +       $(Q)install -D -m 755 $(KBUILD_IMAGE) $(INSTALL_PATH)/vmlinuz-$(KERNELRELEASE)
> > +endif
> >         $(Q)install -D -m 644 .config $(INSTALL_PATH)/config-$(KERNELRELEASE)
> >         $(Q)install -D -m 644 System.map $(INSTALL_PATH)/System.map-$(KERNELRELEASE)
> >
> 
> Is there any reason in particular this is open coded like this? Other
> architectures just do something like
> 
> install:
>     $(call cmd,install)
> 
> and be done with it.
It seems that there are two problems:
1, the default install script doesn't install the configuration file;
2, the kernel name in "installkernel" isn't the same as the open coded version, it looks like this:
if [ $ARCH = 'ppc64' -o $ARCH = 'ppc' ]; then
    KERNEL_NAME=vmlinux
else
    KERNEL_NAME=vmlinuz
fi

Maybe we can provide an arch-specific install.sh as arm64 does, but it is even more complex than the open coded version.

Huacai



本邮件及其附件含有龙芯中科的商业秘密信息,仅限于发送给上面地址中列出的个人或群组。禁止任何其他人以任何形式使用(包括但不限于全部或部分地泄露、复制或散发)本邮件及其附件中的信息。如果您错收本邮件,请您立即电话或邮件通知发件人并删除本邮件。 
This email and its attachments contain confidential information from Loongson Technology , which is intended only for the person or entity whose address is listed above. Any use of the information contained herein in any way (including, but not limited to, total or partial disclosure, reproduction or dissemination) by persons other than the intended recipient(s) is prohibited. If you receive this email in error, please notify the sender by phone or email immediately and delete it. 




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux