> -----Original Message-----
[...]
> > +static int __init setup_ghes_edac_load(char *str) {
> > + if (str)
> > + if (!strcmp("true", str) || !strcmp("1", str))
> > + ghes_edac_force = true;
> > +
> > + if (!IS_ENABLED(CONFIG_X86))
> > + ghes_edac_force = true;
> > +
> > + return 1;
> > +}
> > +__setup("ghes_edac_force=", setup_ghes_edac_load);
>
> Why all that?
>
> Isn't specifying
>
> ghes.edac_force_load
Ok, I will use module parameter ghes.edac_force_load.
>
> on the kernel command line enough? I.e., you don't need to parse the passed
> in option - just the presence of the parameter is enough.
>
> > +
> > static ATOMIC_NOTIFIER_HEAD(ghes_report_chain);
> >
> > static inline bool is_hest_type_generic_v2(struct ghes *ghes) @@
> > -1517,13 +1537,13 @@ static struct acpi_platform_list plat_list[] = {
> > { } /* End */
> > };
> >
> > -struct list_head *ghes_get_devices(bool force)
> > +struct list_head *ghes_get_devices(void)
> > {
> > int idx = -1;
> >
> > if (IS_ENABLED(CONFIG_X86)) {
> > idx = acpi_match_platform_list(plat_list);
> > - if (idx < 0 && !force)
> > + if (idx < 0 && !ghes_edac_force)
> > return NULL;
> > }
> >
> > diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c index
> > bb3ea42ba70b..6a2b54cc7240 100644
> > --- a/drivers/edac/ghes_edac.c
> > +++ b/drivers/edac/ghes_edac.c
> > @@ -54,10 +54,6 @@ static DEFINE_MUTEX(ghes_reg_mutex);
> > */
> > static DEFINE_SPINLOCK(ghes_lock);
> >
> > -/* "ghes_edac.force_load=1" skips the platform check */ -static bool
> > __read_mostly force_load; -module_param(force_load, bool, 0);
> > -
> > static bool system_scanned;
> >
> > static struct list_head *ghes_devs;
> > @@ -437,23 +433,12 @@ static int ghes_edac_register(struct device *dev)
> > mci->ctl_name = "ghes_edac";
> > mci->dev_name = "ghes";
> >
> > - if (fake) {
> > - pr_info("This system has a very crappy BIOS: It doesn't even list the
> DIMMS.\n");
> > - pr_info("Its SMBIOS info is wrong. It is doubtful that the error report
> would\n");
> > - pr_info("work on such system. Use this driver with caution\n");
> > - } else if (force_load) {
> > - pr_info("This EDAC driver relies on BIOS to enumerate memory and
> get error reports.\n");
> > - pr_info("Unfortunately, not all BIOSes reflect the memory layout
> correctly.\n");
> > - pr_info("So, the end result of using this driver varies from vendor to
> vendor.\n");
> > - pr_info("If you find incorrect reports, please contact your hardware
> vendor\n");
> > - pr_info("to correct its BIOS.\n");
> > - pr_info("This system has %d DIMM sockets.\n",
> ghes_hw.num_dimms);
> > - }
> > -
> > if (!fake) {
> > struct dimm_info *src, *dst;
> > int i = 0;
> >
> > + pr_info("This system has %d DIMM sockets.\n",
> ghes_hw.num_dimms);
> > +
> > mci_for_each_dimm(mci, dst) {
> > src = &ghes_hw.dimms[i];
> >
>
> This hunk...
Sorry, should move pr_info after this line
>
> > @@ -478,6 +463,17 @@ static int ghes_edac_register(struct device *dev)
> > } else {
> > struct dimm_info *dimm = edac_get_dimm(mci, 0, 0, 0);
> >
> > + pr_info("This system has a very crappy BIOS: It doesn't even list the
> DIMMS.\n");
> > + pr_info("Its SMBIOS info is wrong. It is doubtful that the error report
> would\n");
> > + pr_info("work on such system. Use this driver with caution\n");
> > +
> > + if (ghes_edac_force) {
> > + pr_info("This EDAC driver relies on BIOS to enumerate memory
> and get\n");
> > + pr_info("error reports. Unfortunately, not all BIOSes reflect
> the\n");
> > + pr_info("memory layout correctly. If you find incorrect reports,
> please\n");
> > + pr_info("contact your hardware vendor for its in correct
> BIOS.\n");
> > + }
> > +
> > dimm->nr_pages = 1;
> > dimm->grain = 128;
> > dimm->mtype = MEM_UNKNOWN;
>
> ... and this hunk look unrelated to what this patch is doing. What are they for?
>
I tried to keep the previous same logic.
if (fake)
print_something
- !fake && ghes not preferred.
print_otherthings
--
Cheers,
Justin (Jia He)
