Re: [PATCH v3 4/5] mtd_blkdevs: add option to enable scanning for partitions

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Jun 03, 2022 at 03:48:04PM +0200, Miquel Raynal wrote:
> Hi Daniel,
> 
> daniel@xxxxxxxxxxxxxx wrote on Thu, 12 May 2022 20:39:27 +0100:
> 
> > Add Kconfig boolean CONFIG_MTD_BLOCK_PARTITIONS and enable block
> > partition parsers on non-NAND mtdblock devices in case it is selected.
> > 
> > Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
> > ---
> >  drivers/mtd/Kconfig       | 11 +++++++++++
> >  drivers/mtd/mtd_blkdevs.c |  4 +++-
> >  2 files changed, 14 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig
> > index 796a2eccbef0b8..12874dec15692a 100644
> > --- a/drivers/mtd/Kconfig
> > +++ b/drivers/mtd/Kconfig
> > @@ -69,6 +69,17 @@ config MTD_BLOCK_RO
> >  	  You do not need this option for use with the DiskOnChip devices. For
> >  	  those, enable NFTL support (CONFIG_NFTL) instead.
> >  
> > +config MTD_BLOCK_PARTITIONS
> > +	bool "Scan for partitions on MTD block devices"
> > +	depends on MTD_BLOCK || MTD_BLOCK_RO
> > +	default y if FIT_PARTITION
> > +	help
> > +	  Scan MTD block devices for partitions (ie. MBR, GPT, uImage.FIT, ...).
> > +	  (NAND devices are omitted, ubiblock should be used instead when)
> > +
> > +	  Unless your MTD partitions contain sub-partitions mapped using a
> > +	  partition table, say no.
> > +
> >  comment "Note that in some cases UBI block is preferred. See MTD_UBI_BLOCK."
> >  	depends on MTD_BLOCK || MTD_BLOCK_RO
> >  
> > diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c
> > index f7317211146550..c67ce2e6fbeb0a 100644
> > --- a/drivers/mtd/mtd_blkdevs.c
> > +++ b/drivers/mtd/mtd_blkdevs.c
> > @@ -359,7 +359,9 @@ int add_mtd_blktrans_dev(struct mtd_blktrans_dev *new)
> >  	} else {
> >  		snprintf(gd->disk_name, sizeof(gd->disk_name),
> >  			 "%s%d", tr->name, new->devnum);
> > -		gd->flags |= GENHD_FL_NO_PART;
> > +
> > +		if (!IS_ENABLED(CONFIG_MTD_BLOCK_PARTITIONS) || mtd_type_is_nand(new->mtd))
> > +			gd->flags |= GENHD_FL_NO_PART;
> 
> I really wonder if we need this in mtdblock ? Isn't ubiblock enough?

One of the ideas behind this series is to be able to use the exact same
image (which includes a rootfs filesystem sub-image) on devices with
different boot storage options instead of having to write kernel and
root filesystems separately in a storage-type specific manner.

So the very same uImage.FIT on devices with block-based storage can be
written into a GPT partition (see 3/5), on devices with NAND flash
where UBI is used into a UBI volume (see 5/5) and on devices with NOR
flash into an MTD partition (this patch).

> 
> Anyhow,
> Acked-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>

Thank you for the review!


> 
> I'll let Richard ack the ubiblock patch.
> 
> Thanks,
> Miquèl
> 
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux