Re: [PATCHv4 1/8] mm: Add support for unaccepted memory

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 08, 2022 at 11:55:43AM -0700, Dave Hansen wrote:
> On 4/5/22 16:43, Kirill A. Shutemov wrote:
> > UEFI Specification version 2.9 introduces the concept of memory
> > acceptance. Some Virtual Machine platforms, such as Intel TDX or AMD
> > SEV-SNP, requiring memory to be accepted before it can be used by the
> 
> 		^ require

Heh. That's wording form the spec.

> > guest. Accepting happens via a protocol specific for the Virtual Machine
> > platform.
> 
> 							^ s/for/to
> 
> > Accepting memory is costly and it makes VMM allocate memory for the
> > accepted guest physical address range. It's better to postpone memory
> > acceptance until memory is needed. It lowers boot time and reduces
> > memory overhead.
> > 
> > Support of such memory requires a few changes in core-mm code:
> > 
> >   - memblock has to accept memory on allocation;
> > 
> >   - page allocator has to accept memory on the first allocation of the
> >     page;
> > 
> > Memblock change is trivial.
> > 
> > The page allocator is modified to accept pages on the first allocation.
> > PageUnaccepted() is used to indicate that the page requires acceptance.
> 
> Does this consume an actual page flag or is it aliased?

It is encoded as a page type in mapcount of unallocated memory. It is not
aliased with PageOffline() as I did before.

I will mention that it is a new page type.

> > Kernel only needs to accept memory once after boot, so during the boot
> > and warm up phase there will be a lot of memory acceptance. After things
> > are settled down the only price of the feature if couple of checks for
> > PageUnaccepted() in allocate and free paths. The check refers a hot
> 
> 							       ^ to
> 
> ...
> > + /*
> > +  * PageUnaccepted() indicates that the page has to be "accepted" before it can
> > +  * be used. Page allocator has to call accept_page() before returning the page
> > +  * to the caller.
> > +  */
> 
> Let's talk about "used" with a bit more detail.  Maybe:
> 
> /*
>  * PageUnaccepted() indicates that the page has to be "accepted" before
>  * it can be read or written.  The page allocator must to call
>  * accept_page() before touching the page or returning it to the caller.
>  */

I guess s/must to call/must call/, right?

> ...
> > diff --git a/mm/page_alloc.c b/mm/page_alloc.c
> > index 2db95780e003..53f4aa1c92a7 100644
> > --- a/mm/page_alloc.c
> > +++ b/mm/page_alloc.c
> > @@ -121,6 +121,12 @@ typedef int __bitwise fpi_t;
> >   */
> >  #define FPI_SKIP_KASAN_POISON	((__force fpi_t)BIT(2))
> >  
> > +/*
> > + * Check if the page needs to be marked as PageUnaccepted().
> > + * Used for the new pages added to the buddy allocator for the first time.
> > + */
> > +#define FPI_UNACCEPTED		((__force fpi_t)BIT(3))
> > +
> >  /* prevent >1 _updater_ of zone percpu pageset ->high and ->batch fields */
> >  static DEFINE_MUTEX(pcp_batch_high_lock);
> >  #define MIN_PERCPU_PAGELIST_HIGH_FRACTION (8)
> > @@ -1023,6 +1029,26 @@ buddy_merge_likely(unsigned long pfn, unsigned long buddy_pfn,
> >  	return page_is_buddy(higher_page, higher_buddy, order + 1);
> >  }
> >  
> > +static void accept_page(struct page *page, unsigned int order)
> > +{
> > +	phys_addr_t start = page_to_phys(page);
> > +	int i;
> > +
> > +	accept_memory(start, start + (PAGE_SIZE << order));
> > +
> > +	for (i = 0; i < (1 << order); i++) {
> > +		if (PageUnaccepted(page + i))
> > +			__ClearPageUnaccepted(page + i);
> > +	}
> > +}
> 
> It's probably worth a comment somewhere that this can be really slow.
> 
> > +static bool page_is_unaccepted(struct page *page, unsigned int order)
> > +{
> > +	phys_addr_t start = page_to_phys(page);
> > +
> > +	return memory_is_unaccepted(start, start + (PAGE_SIZE << order));
> > +}
> > +
> >  /*
> >   * Freeing function for a buddy system allocator.
> >   *
> > @@ -1058,6 +1084,7 @@ static inline void __free_one_page(struct page *page,
> >  	unsigned long combined_pfn;
> >  	struct page *buddy;
> >  	bool to_tail;
> > +	bool unaccepted = PageUnaccepted(page);
> >  
> >  	VM_BUG_ON(!zone_is_initialized(zone));
> >  	VM_BUG_ON_PAGE(page->flags & PAGE_FLAGS_CHECK_AT_PREP, page);
> > @@ -1089,6 +1116,11 @@ static inline void __free_one_page(struct page *page,
> >  			clear_page_guard(zone, buddy, order, migratetype);
> >  		else
> >  			del_page_from_free_list(buddy, zone, order);
> > +
> > +		/* Mark page unaccepted if any of merged pages were unaccepted */
> > +		if (PageUnaccepted(buddy))
> > +			unaccepted = true;
> 
> Naming nit: following the logic with a double-negative like !unaccepted
> is a bit hard.  Would this be more readable if it were:
> 
> 	bool page_needs_acceptance = PageUnaccepted(page);
> 
> and then the code below...
> 
> >  		combined_pfn = buddy_pfn & pfn;
> >  		page = page + (combined_pfn - pfn);
> >  		pfn = combined_pfn;
> > @@ -1124,6 +1156,17 @@ static inline void __free_one_page(struct page *page,
> >  done_merging:
> >  	set_buddy_order(page, order);
> >  
> > +	/*
> > +	 * Check if the page needs to be marked as PageUnaccepted().
> > +	 * Used for the new pages added to the buddy allocator for the first
> > +	 * time.
> > +	 */
> > +	if (!unaccepted && (fpi_flags & FPI_UNACCEPTED))
> > +		unaccepted = page_is_unaccepted(page, order);
> 
> 	if (page_needs_acceptance && (fpi_flags & FPI_UNACCEPTED))
> 		page_needs_acceptance = page_is_unaccepted(page, order);
> 
> > +	if (unaccepted)
> > +		__SetPageUnaccepted(page);
> 
> This is getting hard for me to follow.
> 
> There are:
> 1. Pages that come in here with PageUnaccepted()==1
> 2. Pages that come in here with PageUnaccepted()==0, but a buddy that
>    was PageUnaccepted()==1
> 
> In either of those cases, the bitmap will be consulted to see if the
> page is *truly* unaccepted or not.  But, I'm struggling to figure out
> how a page could end up in one of those scenarios and *not* be
> page_is_unaccepted().
> 
> There are three pieces of information that come in:
> 1. PageUnaccepted(page)
> 2. PageUnaccepted(buddies[])
> 3. the bitmap

1 and 2 are the same conceptionally: merged-in pieces of the resulting page.

> 
> and one piece of information going out:
> 
> PageUnaccepted(page);
> 
> I think I need a more coherent description of how those four things fit
> together.

The page gets marked as PageUnaccepted() if any of merged-in pages is
PageUnaccepted().

For new pages, just being added to buddy allocator, consult
page_is_unaccepted(). FPI_UNACCEPTED indicates that the page is new and
page_is_unaccepted() check is required.

Avoid calling page_is_unaccepted() if it is known that the page needs
acceptance anyway. It can be costly.

Is it good enough explanation?

FPI_UNACCEPTED is not a good name. Any help with a better one?
FPI_CHECK_UNACCEPTED?

> >  	if (fpi_flags & FPI_TO_TAIL)
> >  		to_tail = true;
> >  	else if (is_shuffle_order(order))
> > @@ -1149,7 +1192,8 @@ static inline void __free_one_page(struct page *page,
> >  static inline bool page_expected_state(struct page *page,
> >  					unsigned long check_flags)
> >  {
> > -	if (unlikely(atomic_read(&page->_mapcount) != -1))
> > +	if (unlikely(atomic_read(&page->_mapcount) != -1) &&
> > +	    !PageUnaccepted(page))
> >  		return false;
> 
> That probably deserves a comment, and maybe its own if() statement.

Own if does not work. PageUnaccepted() is encoded in _mapcount.

What about this:

	/*
	 * page->_mapcount is expected to be -1.
	 *
	 * There is an exception for PageUnaccepted(). The page type can be set
	 * for pages on free list. Page types are encoded in _mapcount.
	 *
	 * PageUnaccepted() will get cleared in post_alloc_hook().
	 */
	if (unlikely((atomic_read(&page->_mapcount) | PG_unaccepted) != -1))
		return false;

?

> >  	if (unlikely((unsigned long)page->mapping |
> > @@ -1654,7 +1698,8 @@ void __free_pages_core(struct page *page, unsigned int order)
> >  	 * Bypass PCP and place fresh pages right to the tail, primarily
> >  	 * relevant for memory onlining.
> >  	 */
> > -	__free_pages_ok(page, order, FPI_TO_TAIL | FPI_SKIP_KASAN_POISON);
> > +	__free_pages_ok(page, order,
> > +			FPI_TO_TAIL | FPI_SKIP_KASAN_POISON | FPI_UNACCEPTED);
> >  }
> >  
> >  #ifdef CONFIG_NUMA
> > @@ -1807,6 +1852,7 @@ static void __init deferred_free_range(unsigned long pfn,
> >  		return;
> >  	}
> >  
> > +	accept_memory(pfn << PAGE_SHIFT, (pfn + nr_pages) << PAGE_SHIFT);
> >  	for (i = 0; i < nr_pages; i++, page++, pfn++) {
> >  		if ((pfn & (pageblock_nr_pages - 1)) == 0)
> >  			set_pageblock_migratetype(page, MIGRATE_MOVABLE);
> 
> Comment, please.  I assume doing the slow accept up front is OK here
> because this is in the deferred path.  But, it would be nice to know for
> sure.

It is acceptance of smaller than page block upfront. I will add a comment.

> 
> > @@ -2266,6 +2312,10 @@ static inline void expand(struct zone *zone, struct page *page,
> >  		if (set_page_guard(zone, &page[size], high, migratetype))
> >  			continue;
> >  
> > +		/* Transfer PageUnaccepted() to the newly split pages */
> > +		if (PageUnaccepted(page))
> > +			__SetPageUnaccepted(&page[size]);
> 
> We don't want to just accept the page here, right?  Because we're
> holding the zone lock?  Maybe we should mention that:
> 
> 		/*
> 		 * Transfer PageUnaccepted() to the newly split pages so
> 		 * they can be accepted after dropping the zone lock.
> 		 */

Okay.

> >  		add_to_free_list(&page[size], zone, high, migratetype);
> >  		set_buddy_order(&page[size], high);
> >  	}
> > @@ -2396,6 +2446,9 @@ inline void post_alloc_hook(struct page *page, unsigned int order,
> >  	 */
> >  	kernel_unpoison_pages(page, 1 << order);
> >  
> > +	if (PageUnaccepted(page))
> > +		accept_page(page, order);
> > +
> >  	/*
> >  	 * As memory initialization might be integrated into KASAN,
> >  	 * KASAN unpoisoning and memory initializion code must be
> 
> Is accepted memory guaranteed to be zeroed?  Do we want to skip the
> __GFP_ZERO behavior later in this function?  Or is that just a silly
> over-optimization?

For TDX, it is true that the memory gets cleared on acceptance, but I
don't we can say the same for any possible implementation.

I would rather leave __GFP_ZERO for peace of mind. Clearing the cache-hot
page for the second time shouldn't be a big deal comparing to acceptance
cost.

-- 
 Kirill A. Shutemov



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux