Re: [PATCH v2 00/10] Introduce sv48 support without relocatable kernel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/25/21 00:29, Heiko Stübner wrote:
Am Mittwoch, 29. September 2021, 16:51:03 CET schrieb Alexandre Ghiti:
This patchset allows to have a single kernel for sv39 and sv48 without
being relocatable.
The idea comes from Arnd Bergmann who suggested to do the same as x86,
that is mapping the kernel to the end of the address space, which allows
the kernel to be linked at the same address for both sv39 and sv48 and
then does not require to be relocated at runtime.
This implements sv48 support at runtime. The kernel will try to
boot with 4-level page table and will fallback to 3-level if the HW does not
support it. Folding the 4th level into a 3-level page table has almost no
cost at runtime.
Tested on:
   - qemu rv64 sv39: OK
   - qemu rv64 sv48: OK
   - qemu rv64 sv39 + kasan: OK
   - qemu rv64 sv48 + kasan: OK
   - qemu rv32: OK
   - Unmatched: OK
On a beagleV (which supports only sv39) I've tested both the limit via
the mmu-type in the devicetree and also that the fallback works when
I disable the mmu-type in the dt, so

Tested-by: Heiko Stuebner <heiko@xxxxxxxxx>


Thanks Heiko for testing this, unfortunately I could not add this tag to the latest version as significant changes came up.

Thanks again for taking the time to test this,

Alex


Changes in v2:
   - Rebase onto for-next
   - Fix KASAN
   - Fix stack canary
   - Get completely rid of MAXPHYSMEM configs
   - Add documentation

Alexandre Ghiti (10):
   riscv: Allow to dynamically define VA_BITS
   riscv: Get rid of MAXPHYSMEM configs
   asm-generic: Prepare for riscv use of pud_alloc_one and pud_free
   riscv: Implement sv48 support
   riscv: Use pgtable_l4_enabled to output mmu_type in cpuinfo
   riscv: Explicit comment about user virtual address space size
   riscv: Improve virtual kernel memory layout dump
   Documentation: riscv: Add sv48 description to VM layout
   riscv: Initialize thread pointer before calling C functions
   riscv: Allow user to downgrade to sv39 when hw supports sv48

  Documentation/riscv/vm-layout.rst             |  36 ++
  arch/riscv/Kconfig                            |  35 +-
  arch/riscv/configs/nommu_k210_defconfig       |   1 -
  .../riscv/configs/nommu_k210_sdcard_defconfig |   1 -
  arch/riscv/configs/nommu_virt_defconfig       |   1 -
  arch/riscv/include/asm/csr.h                  |   3 +-
  arch/riscv/include/asm/fixmap.h               |   1 +
  arch/riscv/include/asm/kasan.h                |   2 +-
  arch/riscv/include/asm/page.h                 |  10 +
  arch/riscv/include/asm/pgalloc.h              |  40 +++
  arch/riscv/include/asm/pgtable-64.h           | 108 +++++-
  arch/riscv/include/asm/pgtable.h              |  30 +-
  arch/riscv/include/asm/sparsemem.h            |   6 +-
  arch/riscv/kernel/cpu.c                       |  23 +-
  arch/riscv/kernel/head.S                      |   4 +-
  arch/riscv/mm/context.c                       |   4 +-
  arch/riscv/mm/init.c                          | 323 +++++++++++++++---
  arch/riscv/mm/kasan_init.c                    |  91 +++--
  drivers/firmware/efi/libstub/efi-stub.c       |   2 +
  include/asm-generic/pgalloc.h                 |  24 +-
  include/linux/sizes.h                         |   1 +
  21 files changed, 615 insertions(+), 131 deletions(-)








[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux