Tablet / laptop designs using an Intel Cherry Trail x86 main SoC with
an Intel Whiskey Cove PMIC do not use a single standard setup for
the charger, fuel-gauge and other chips surrounding the PMIC /
charging+data USB port.
Unlike what is normal on x86 this diversity in designs is not handled
by the ACPI tables. On 2 of the 3 known designs there are no standard
(PNP0C0A) ACPI battery devices and on the 3th design the ACPI battery
device does not work under Linux due to it requiring non-standard
and undocumented ACPI behavior.
So to make things work under Linux we use native charger and fuel-gauge
drivers on these devices, re-using the native drivers used on ARM boards
with the same charger / fuel-gauge ICs.
This requires various MFD-cell drivers for the CHT-WC PMIC cells to
know which model they are exactly running on so that they can e.g.
instantiate an I2C-client for the right model charger-IC (the charger
is connected to an I2C-controller which is part of the PMIC).
Rather then duplicating DMI-id matching to check which model we are
running on in each MFD-cell driver, add a check for this to the
shared drivers/mfd/intel_soc_pmic_chtwc.c code by using a
DMI table for all 3 known models:
1. The GPD Win and GPD Pocket mini-laptops, these are really 2 models
but the Pocket re-uses the GPD Win's design in a different housing:
The WC PMIC is connected to a TI BQ24292i charger, paired with
a Maxim MAX17047 fuelgauge + a FUSB302 USB Type-C Controller +
a PI3USB30532 USB switch, for a fully functional Type-C port.
2. The Xiaomi Mi Pad 2:
The WC PMIC is connected to a TI BQ25890 charger, paired with
a TI BQ27520 fuelgauge, using the TI BQ25890 for BC1.2 charger type
detection, for a USB-2 only Type-C port without PD.
3. The Lenovo Yoga Book YB1-X90 / Lenovo Yoga Book YB1-X91 series:
The WC PMIC is connected to a TI BQ25892 charger, paired with
a TI BQ27542 fuelgauge, using the WC PMIC for BC1.2 charger type
detection and using the BQ25892's Mediatek Pump Express+ (1.0)
support to enable charging with up to 12V through a micro-USB port.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v3:
- Store the model in struct intel_soc_pmic instead of adding a helper
function to retreive it
Changes in v2:
- New patch in v2 of this patch-set
---
drivers/mfd/intel_soc_pmic_chtwc.c | 37 ++++++++++++++++++++++++++++++
include/linux/mfd/intel_soc_pmic.h | 8 +++++++
2 files changed, 45 insertions(+)
diff --git a/drivers/mfd/intel_soc_pmic_chtwc.c b/drivers/mfd/intel_soc_pmic_chtwc.c
index 49c5f71664bc..705e9b61d60f 100644
--- a/drivers/mfd/intel_soc_pmic_chtwc.c
+++ b/drivers/mfd/intel_soc_pmic_chtwc.c
@@ -10,6 +10,7 @@
#include <linux/acpi.h>
#include <linux/delay.h>
+#include <linux/dmi.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/interrupt.h>
@@ -134,9 +135,41 @@ static const struct regmap_irq_chip cht_wc_regmap_irq_chip = {
.num_regs = 1,
};
+static const struct dmi_system_id cht_wc_model_dmi_ids[] = {
+ { /* GPD win / GPD pocket mini laptops */
+ .driver_data = (void *)(long)INTEL_CHT_WC_GPD_WIN_POCKET,
+ /*
+ * This DMI match may not seem unique, but it is. In the 67000+
+ * DMI decode dumps from linux-hardware.org only 116 have
+ * board_vendor set to "AMI Corporation" and of those 116 only
+ * the GPD win's and pocket's board_name is "Default string".
+ */
+ .matches = {
+ DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "Default string"),
+ DMI_EXACT_MATCH(DMI_BOARD_SERIAL, "Default string"),
+ DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "Default string"),
+ },
+ }, { /* Xiaomi Mi Pad 2 */
+ .driver_data = (void *)(long)INTEL_CHT_WC_XIAOMI_MIPAD2,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Xiaomi Inc"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Mipad2"),
+ },
+ }, { /* Lenovo Yoga Book X90F / X91F / X91L */
+ .driver_data = (void *)(long)INTEL_CHT_WC_LENOVO_YOGABOOK1,
+ .matches = {
+ /* Non exact match to match all versions */
+ DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9"),
+ },
+ },
+ { } /* Terminating empty */
+};
+
static int cht_wc_probe(struct i2c_client *client)
{
struct device *dev = &client->dev;
+ const struct dmi_system_id *id;
struct intel_soc_pmic *pmic;
acpi_status status;
unsigned long long hrv;
@@ -160,6 +193,10 @@ static int cht_wc_probe(struct i2c_client *client)
if (!pmic)
return -ENOMEM;
+ id = dmi_first_match(cht_wc_model_dmi_ids);
+ if (id)
+ pmic->cht_wc_model = (long)id->driver_data;
+
pmic->irq = client->irq;
pmic->dev = dev;
i2c_set_clientdata(client, pmic);
diff --git a/include/linux/mfd/intel_soc_pmic.h b/include/linux/mfd/intel_soc_pmic.h
index 6a88e34cb955..945bde1fe55c 100644
--- a/include/linux/mfd/intel_soc_pmic.h
+++ b/include/linux/mfd/intel_soc_pmic.h
@@ -13,6 +13,13 @@
#include <linux/regmap.h>
+enum intel_cht_wc_models {
+ INTEL_CHT_WC_UNKNOWN,
+ INTEL_CHT_WC_GPD_WIN_POCKET,
+ INTEL_CHT_WC_XIAOMI_MIPAD2,
+ INTEL_CHT_WC_LENOVO_YOGABOOK1,
+};
+
/**
* struct intel_soc_pmic - Intel SoC PMIC data
* @irq: Master interrupt number of the parent PMIC device
@@ -39,6 +46,7 @@ struct intel_soc_pmic {
struct regmap_irq_chip_data *irq_chip_data_crit;
struct device *dev;
struct intel_scu_ipc_dev *scu;
+ enum intel_cht_wc_models cht_wc_model;
};
int intel_soc_pmic_exec_mipi_pmic_seq_element(u16 i2c_address, u32 reg_address,
--
2.33.1
