Hi, On 11/23/21 09:24, Wolfram Sang wrote: > On Sun, Nov 14, 2021 at 06:03:30PM +0100, Hans de Goede wrote: >> The i2c-controller on the Cherry Trail - Whiskey Cove PMIC is special >> in that it is always connected to the I2C charger IC of the board on >> which the PMIC is used; and the charger IC is not described in ACPI, >> so the i2c-cht-wc code needs to instantiate an i2c-client for it itself. >> >> So far this was hardcoded to instantiate an i2c-client for the >> bq24292i, with all properties, etc. set to match how this charger >> is used on the GPD win and GPD pcoket devices. >> >> There is a rudimentary check to make sure the ACPI tables are at least >> somewhat as expected, but this is far from accurate, leading to >> a wrong i2c-client being instantiated for the charger on some boards. >> >> Switch to the new DMI based intel_cht_wc_get_model() helper which is >> exported by the MFD driver for the CHT Whiskey Cove PMIC to help PMIC >> cell drivers like the i2c-cht-wc code reliably detect which board >> they are running on. >> >> And add board_info for the charger ICs as found on the other 2 known >> boards with a Whisky Cove PMIC. >> >> This has been tested on all 3 known boards. >> >> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> > > Here is my Ack to take this via some other tree: > > Acked-by: Wolfram Sang <wsa@xxxxxxxxxx> Great, thank you. > No need to send further versions of this series to the i2c-list, I'd > think. Ok I will drop the i2c-list from the Cc for further versions of this series. Regards, Hans
