Hi,
On Sat, Oct 30, 2021 at 08:28:04PM +0200, Hans de Goede wrote:
> The code doing the initial setting of the F_CONV_RATE field based
> on the bq->state.online flag. In order for this to work properly,
> this must be done after the initial bq25890_get_chip_state() call.
>
> Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
> ---
Thanks, queued.
-- Sebastian
> drivers/power/supply/bq25890_charger.c | 10 +++++-----
> 1 file changed, 5 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/power/supply/bq25890_charger.c b/drivers/power/supply/bq25890_charger.c
> index 491d36a3811a..99497fdc73da 100644
> --- a/drivers/power/supply/bq25890_charger.c
> +++ b/drivers/power/supply/bq25890_charger.c
> @@ -682,16 +682,16 @@ static int bq25890_hw_init(struct bq25890_device *bq)
> }
> }
>
> - /* Configure ADC for continuous conversions when charging */
> - ret = bq25890_field_write(bq, F_CONV_RATE, !!bq->state.online);
> + ret = bq25890_get_chip_state(bq, &bq->state);
> if (ret < 0) {
> - dev_dbg(bq->dev, "Config ADC failed %d\n", ret);
> + dev_dbg(bq->dev, "Get state failed %d\n", ret);
> return ret;
> }
>
> - ret = bq25890_get_chip_state(bq, &bq->state);
> + /* Configure ADC for continuous conversions when charging */
> + ret = bq25890_field_write(bq, F_CONV_RATE, !!bq->state.online);
> if (ret < 0) {
> - dev_dbg(bq->dev, "Get state failed %d\n", ret);
> + dev_dbg(bq->dev, "Config ADC failed %d\n", ret);
> return ret;
> }
>
> --
> 2.31.1
>
Attachment:
signature.asc
Description: PGP signature
