[PATCH Part1 v5 03/38] x86/sev: Get rid of excessive use of defines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Borislav Petkov <bp@xxxxxxx>

Remove all the defines of masks and bit positions for the GHCB MSR
protocol and use comments instead which correspond directly to the spec
so that following those can be a lot easier and straightforward with the
spec opened in parallel to the code.

Aligh vertically while at it.

No functional changes.

Signed-off-by: Borislav Petkov <bp@xxxxxxx>
---
 arch/x86/include/asm/sev-common.h | 51 +++++++++++++++++--------------
 1 file changed, 28 insertions(+), 23 deletions(-)

diff --git a/arch/x86/include/asm/sev-common.h b/arch/x86/include/asm/sev-common.h
index 855b0ec9c4e8..aac44c3f839c 100644
--- a/arch/x86/include/asm/sev-common.h
+++ b/arch/x86/include/asm/sev-common.h
@@ -18,20 +18,19 @@
 /* SEV Information Request/Response */
 #define GHCB_MSR_SEV_INFO_RESP		0x001
 #define GHCB_MSR_SEV_INFO_REQ		0x002
-#define GHCB_MSR_VER_MAX_POS		48
-#define GHCB_MSR_VER_MAX_MASK		0xffff
-#define GHCB_MSR_VER_MIN_POS		32
-#define GHCB_MSR_VER_MIN_MASK		0xffff
-#define GHCB_MSR_CBIT_POS		24
-#define GHCB_MSR_CBIT_MASK		0xff
-#define GHCB_MSR_SEV_INFO(_max, _min, _cbit)				\
-	((((_max) & GHCB_MSR_VER_MAX_MASK) << GHCB_MSR_VER_MAX_POS) |	\
-	 (((_min) & GHCB_MSR_VER_MIN_MASK) << GHCB_MSR_VER_MIN_POS) |	\
-	 (((_cbit) & GHCB_MSR_CBIT_MASK) << GHCB_MSR_CBIT_POS) |	\
+
+#define GHCB_MSR_SEV_INFO(_max, _min, _cbit)	\
+	/* GHCBData[63:48] */			\
+	((((_max) & 0xffff) << 48) |		\
+	 /* GHCBData[47:32] */			\
+	 (((_min) & 0xffff) << 32) |		\
+	 /* GHCBData[31:24] */			\
+	 (((_cbit) & 0xff)  << 24) |		\
 	 GHCB_MSR_SEV_INFO_RESP)
+
 #define GHCB_MSR_INFO(v)		((v) & 0xfffUL)
-#define GHCB_MSR_PROTO_MAX(v)		(((v) >> GHCB_MSR_VER_MAX_POS) & GHCB_MSR_VER_MAX_MASK)
-#define GHCB_MSR_PROTO_MIN(v)		(((v) >> GHCB_MSR_VER_MIN_POS) & GHCB_MSR_VER_MIN_MASK)
+#define GHCB_MSR_PROTO_MAX(v)		(((v) >> 48) & 0xffff)
+#define GHCB_MSR_PROTO_MIN(v)		(((v) >> 32) & 0xffff)
 
 /* CPUID Request/Response */
 #define GHCB_MSR_CPUID_REQ		0x004
@@ -46,27 +45,33 @@
 #define GHCB_CPUID_REQ_EBX		1
 #define GHCB_CPUID_REQ_ECX		2
 #define GHCB_CPUID_REQ_EDX		3
-#define GHCB_CPUID_REQ(fn, reg)		\
-		(GHCB_MSR_CPUID_REQ | \
-		(((unsigned long)reg & GHCB_MSR_CPUID_REG_MASK) << GHCB_MSR_CPUID_REG_POS) | \
-		(((unsigned long)fn) << GHCB_MSR_CPUID_FUNC_POS))
+#define GHCB_CPUID_REQ(fn, reg)				\
+	/* GHCBData[11:0] */				\
+	(GHCB_MSR_CPUID_REQ |				\
+	/* GHCBData[31:12] */				\
+	(((unsigned long)(reg) & 0x3) << 30) |		\
+	/* GHCBData[63:32] */				\
+	(((unsigned long)fn) << 32))
 
 /* AP Reset Hold */
-#define GHCB_MSR_AP_RESET_HOLD_REQ		0x006
-#define GHCB_MSR_AP_RESET_HOLD_RESP		0x007
+#define GHCB_MSR_AP_RESET_HOLD_REQ	0x006
+#define GHCB_MSR_AP_RESET_HOLD_RESP	0x007
 
 /* GHCB Hypervisor Feature Request/Response */
-#define GHCB_MSR_HV_FT_REQ			0x080
-#define GHCB_MSR_HV_FT_RESP			0x081
+#define GHCB_MSR_HV_FT_REQ		0x080
+#define GHCB_MSR_HV_FT_RESP		0x081
 
 #define GHCB_MSR_TERM_REQ		0x100
 #define GHCB_MSR_TERM_REASON_SET_POS	12
 #define GHCB_MSR_TERM_REASON_SET_MASK	0xf
 #define GHCB_MSR_TERM_REASON_POS	16
 #define GHCB_MSR_TERM_REASON_MASK	0xff
-#define GHCB_SEV_TERM_REASON(reason_set, reason_val)						  \
-	(((((u64)reason_set) &  GHCB_MSR_TERM_REASON_SET_MASK) << GHCB_MSR_TERM_REASON_SET_POS) | \
-	((((u64)reason_val) & GHCB_MSR_TERM_REASON_MASK) << GHCB_MSR_TERM_REASON_POS))
+
+#define GHCB_SEV_TERM_REASON(reason_set, reason_val)	\
+	/* GHCBData[15:12] */				\
+	(((((u64)reason_set) &  0xf) << 12) |		\
+	 /* GHCBData[23:16] */				\
+	((((u64)reason_val) & 0xff) << 16))
 
 #define GHCB_SEV_ES_GEN_REQ		0
 #define GHCB_SEV_ES_PROT_UNSUPPORTED	1
-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux