Re: [PATCH 6/8] drivers: firmware: efi: libstub: enable generic commandline

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





Le 30/03/2021 à 19:57, Daniel Walker a écrit :
This adds code to handle the generic command line changes.
The efi code appears that it doesn't benefit as much from this design
as it could.

For example, if you had a prepend command line with "nokaslr" then
you might be helpful to re-enable it in the boot loader or dts,
but there appears to be no way to re-enable kaslr or some of the
other options.

Cc: xe-linux-external@xxxxxxxxx
Signed-off-by: Daniel Walker <danielwa@xxxxxxxxx>
---
  .../firmware/efi/libstub/efi-stub-helper.c    | 35 +++++++++++++++++++
  drivers/firmware/efi/libstub/efi-stub.c       |  7 ++++
  drivers/firmware/efi/libstub/efistub.h        |  1 +
  drivers/firmware/efi/libstub/x86-stub.c       | 13 +++++--
  4 files changed, 54 insertions(+), 2 deletions(-)

diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
index aa8da0a49829..c155837cedc9 100644
--- a/drivers/firmware/efi/libstub/efi-stub-helper.c
+++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
@@ -13,6 +13,7 @@
  #include <linux/efi.h>
  #include <linux/kernel.h>
  #include <linux/printk.h> /* For CONSOLE_LOGLEVEL_* */
+#include <linux/cmdline.h>
  #include <asm/efi.h>
  #include <asm/setup.h>
@@ -172,6 +173,40 @@ int efi_printk(const char *fmt, ...)
  	return printed;
  }
+/**
+ * efi_handle_cmdline() - handle adding in building parts of the command line
+ * @cmdline:	kernel command line
+ *
+ * Add in the generic parts of the commandline and start the parsing of the
+ * command line.
+ *
+ * Return:	status code
+ */
+efi_status_t efi_handle_cmdline(char const *cmdline)
+{
+	efi_status_t status;
+
+	status = efi_parse_options(CMDLINE_PREPEND);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to parse options\n");
+		return status;
+	}
+
+	status = efi_parse_options(IS_ENABLED(CONFIG_CMDLINE_OVERRIDE) ? "" : cmdline);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to parse options\n");
+		return status;
+	}
+
+	status = efi_parse_options(CMDLINE_APPEND);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to parse options\n");
+		return status;
+	}
+
+	return EFI_SUCCESS;
+}

I think we can refactor to first build the final command line, then call efi_parse_options() only once after that.

The big advantage of GENERIC_CMDLINE should be to not address anymore CONFIG_CMDLINE_XXX options at all outside of linux/cmdline.h

+
  /**
   * efi_parse_options() - Parse EFI command line options
   * @cmdline:	kernel command line
diff --git a/drivers/firmware/efi/libstub/efi-stub.c b/drivers/firmware/efi/libstub/efi-stub.c
index 26e69788f27a..760480248adf 100644
--- a/drivers/firmware/efi/libstub/efi-stub.c
+++ b/drivers/firmware/efi/libstub/efi-stub.c
@@ -172,6 +172,12 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
  		goto fail;
  	}
+#ifdef CONFIG_GENERIC_CMDLINE
+	status = efi_handle_cmdline(cmdline_ptr);
+	if (status != EFI_SUCCESS) {
+		goto fail_free_cmdline;
+	}
+#else

Why an alternative ?

  	if (IS_ENABLED(CONFIG_CMDLINE_EXTEND) ||
  	    IS_ENABLED(CONFIG_CMDLINE_FORCE) ||
  	    cmdline_size == 0) {
@@ -189,6 +195,7 @@ efi_status_t __efiapi efi_pe_entry(efi_handle_t handle,
  			goto fail_free_cmdline;
  		}
  	}
+#endif
efi_info("Booting Linux Kernel...\n"); diff --git a/drivers/firmware/efi/libstub/efistub.h b/drivers/firmware/efi/libstub/efistub.h
index cde0a2ef507d..07c7f9fdfffc 100644
--- a/drivers/firmware/efi/libstub/efistub.h
+++ b/drivers/firmware/efi/libstub/efistub.h
@@ -800,6 +800,7 @@ efi_status_t efi_relocate_kernel(unsigned long *image_addr,
  				 unsigned long alignment,
  				 unsigned long min_addr);
+efi_status_t efi_handle_cmdline(char const *cmdline);
  efi_status_t efi_parse_options(char const *cmdline);
void efi_parse_option_graphics(char *option);
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index f14c4ff5839f..30ad8fb7122d 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -673,6 +673,8 @@ unsigned long efi_main(efi_handle_t handle,
  	unsigned long bzimage_addr = (unsigned long)startup_32;
  	unsigned long buffer_start, buffer_end;
  	struct setup_header *hdr = &boot_params->hdr;
+	unsigned long cmdline_paddr = ((u64)hdr->cmd_line_ptr |
+				       ((u64)boot_params->ext_cmd_line_ptr << 32));
  	efi_status_t status;
efi_system_table = sys_table_arg;
@@ -735,6 +737,14 @@ unsigned long efi_main(efi_handle_t handle,
  		image_offset = 0;
  	}
+#ifdef CONFIG_GENERIC_CMDLINE
+	status = efi_handle_cmdline((char *)cmdline_paddr);
+	if (status != EFI_SUCCESS) {
+		efi_err("Failed to parse options\n");
+		goto fail;
+	}
+#else /* CONFIG_GENERIC_CMDLINE */
+
  #ifdef CONFIG_CMDLINE_BOOL
  	status = efi_parse_options(CONFIG_CMDLINE);
  	if (status != EFI_SUCCESS) {
@@ -743,8 +753,6 @@ unsigned long efi_main(efi_handle_t handle,
  	}
  #endif
  	if (!IS_ENABLED(CONFIG_CMDLINE_OVERRIDE)) {
-		unsigned long cmdline_paddr = ((u64)hdr->cmd_line_ptr |
-					       ((u64)boot_params->ext_cmd_line_ptr << 32));
  		status = efi_parse_options((char *)cmdline_paddr);
  		if (status != EFI_SUCCESS) {
  			efi_err("Failed to parse options\n");
@@ -752,6 +760,7 @@ unsigned long efi_main(efi_handle_t handle,
  		}
  	}
+#endif
  	/*
  	 * At this point, an initrd may already have been loaded by the
  	 * bootloader and passed via bootparams. We permit an initrd loaded




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux