[PATCH 5/5] CMDLINE: x86: convert to generic builtin command line

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This updates the x86 code to use the CONFIG_GENERIC_CMDLINE
option.

Cc: xe-linux-external@xxxxxxxxx
Signed-off-by: Ruslan Ruslichenko <rruslich@xxxxxxxxx>
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@xxxxxxxxx>
Signed-off-by: Daniel Walker <danielwa@xxxxxxxxx>
---
 arch/x86/Kconfig                        | 44 +------------------------
 arch/x86/kernel/setup.c                 | 18 ++--------
 drivers/firmware/efi/libstub/x86-stub.c |  2 +-
 3 files changed, 4 insertions(+), 60 deletions(-)

diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 21f851179ff0..3950f9bf9855 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -115,6 +115,7 @@ config X86
 	select EDAC_SUPPORT
 	select GENERIC_CLOCKEVENTS_BROADCAST	if X86_64 || (X86_32 && X86_LOCAL_APIC)
 	select GENERIC_CLOCKEVENTS_MIN_ADJUST
+	select GENERIC_CMDLINE
 	select GENERIC_CMOS_UPDATE
 	select GENERIC_CPU_AUTOPROBE
 	select GENERIC_CPU_VULNERABILITIES
@@ -2368,49 +2369,6 @@ choice
 
 endchoice
 
-config CMDLINE_BOOL
-	bool "Built-in kernel command line"
-	help
-	  Allow for specifying boot arguments to the kernel at
-	  build time.  On some systems (e.g. embedded ones), it is
-	  necessary or convenient to provide some or all of the
-	  kernel boot arguments with the kernel itself (that is,
-	  to not rely on the boot loader to provide them.)
-
-	  To compile command line arguments into the kernel,
-	  set this option to 'Y', then fill in the
-	  boot arguments in CONFIG_CMDLINE.
-
-	  Systems with fully functional boot loaders (i.e. non-embedded)
-	  should leave this option set to 'N'.
-
-config CMDLINE
-	string "Built-in kernel command string"
-	depends on CMDLINE_BOOL
-	default ""
-	help
-	  Enter arguments here that should be compiled into the kernel
-	  image and used at boot time.  If the boot loader provides a
-	  command line at boot time, it is appended to this string to
-	  form the full kernel command line, when the system boots.
-
-	  However, you can use the CONFIG_CMDLINE_OVERRIDE option to
-	  change this behavior.
-
-	  In most cases, the command line (whether built-in or provided
-	  by the boot loader) should specify the device for the root
-	  file system.
-
-config CMDLINE_OVERRIDE
-	bool "Built-in command line overrides boot loader arguments"
-	depends on CMDLINE_BOOL && CMDLINE != ""
-	help
-	  Set this option to 'Y' to have the kernel ignore the boot loader
-	  command line, and use ONLY the built-in command line.
-
-	  This is used to work around broken boot loaders.  This should
-	  be set to 'N' under normal conditions.
-
 config MODIFY_LDT_SYSCALL
 	bool "Enable the LDT (local descriptor table)" if EXPERT
 	default y
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index 740f3bdb3f61..e748c3e5c1ae 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -48,6 +48,7 @@
 #include <asm/unwind.h>
 #include <asm/vsyscall.h>
 #include <linux/vmalloc.h>
+#include <linux/cmdline.h>
 
 /*
  * max_low_pfn_mapped: highest directly mapped pfn < 4 GB
@@ -162,9 +163,6 @@ unsigned long saved_video_mode;
 #define RAMDISK_LOAD_FLAG		0x4000
 
 static char __initdata command_line[COMMAND_LINE_SIZE];
-#ifdef CONFIG_CMDLINE_BOOL
-static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE;
-#endif
 
 #if defined(CONFIG_EDD) || defined(CONFIG_EDD_MODULE)
 struct edd edd;
@@ -884,19 +882,7 @@ void __init setup_arch(char **cmdline_p)
 	bss_resource.start = __pa_symbol(__bss_start);
 	bss_resource.end = __pa_symbol(__bss_stop)-1;
 
-#ifdef CONFIG_CMDLINE_BOOL
-#ifdef CONFIG_CMDLINE_OVERRIDE
-	strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-#else
-	if (builtin_cmdline[0]) {
-		/* append boot loader cmdline to builtin */
-		strlcat(builtin_cmdline, " ", COMMAND_LINE_SIZE);
-		strlcat(builtin_cmdline, boot_command_line, COMMAND_LINE_SIZE);
-		strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE);
-	}
-#endif
-#endif
-
+	cmdline_add_builtin(boot_command_line, NULL, COMMAND_LINE_SIZE);
 	strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE);
 	*cmdline_p = command_line;
 
diff --git a/drivers/firmware/efi/libstub/x86-stub.c b/drivers/firmware/efi/libstub/x86-stub.c
index f14c4ff5839f..9538c9d4a0bc 100644
--- a/drivers/firmware/efi/libstub/x86-stub.c
+++ b/drivers/firmware/efi/libstub/x86-stub.c
@@ -736,7 +736,7 @@ unsigned long efi_main(efi_handle_t handle,
 	}
 
 #ifdef CONFIG_CMDLINE_BOOL
-	status = efi_parse_options(CONFIG_CMDLINE);
+	status = efi_parse_options(CONFIG_CMDLINE_PREPEND " " CONFIG_CMDLINE_APPEND);
 	if (status != EFI_SUCCESS) {
 		efi_err("Failed to parse options\n");
 		goto fail;
-- 
2.25.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux