Re: Kernel V5.7-rc1 doesn't boot (EFI?)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



* Ard Biesheuvel <ardb@xxxxxxxxxx> wrote:

> On Tue, 14 Apr 2020 at 18:32, Jörg Otte <jrg.otte@xxxxxxxxx> wrote:
> >
> > Am Di., 14. Apr. 2020 um 12:50 Uhr schrieb Ard Biesheuvel <ardb@xxxxxxxxxx>:
> > >
> > > On Tue, 14 Apr 2020 at 12:40, Jörg Otte <jrg.otte@xxxxxxxxx> wrote:
> > > >
> > > > Booting my notebook with kernel V57-rc1 I get following
> > > > display:
> > > >
> > > > exit_boot() failed!
> > > > efi_main() failed!
> > > > StartImage failed: Buffer Too Small
> > > >
> > > > Booting Kernel V5.6 works well.
> > > >
> > > > From dmesg (kernel V5.6):
> > > > efi: EFI v2.31 by Phoenix Technologies Ltd.
> > > > efi:  ACPI=0xdcffe000  ACPI 2.0=0xdcffe014  SMBIOS=0xdce80000  RNG=0xdc3cd198
> > > > efi: seeding entropy pool
> > > > efi: [Firmware Bug]: Invalid EFI memory map entries:
> > > > efi: mem47: [Reserved           |   |  |  |  |  |  |  |  |   |  |  |
> > > > |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
> > > > efi: mem48: [Reserved           |   |  |  |  |  |  |  |  |   |  |  |
> > > > |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
> > > > efi: mem49: [Reserved           |   |  |  |  |  |  |  |  |   |  |  |
> > > > |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
> > > > efi: mem50: [Reserved           |   |  |  |  |  |  |  |  |   |  |  |
> > > > |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
> > > > efi: mem51: [Reserved           |   |  |  |  |  |  |  |  |   |  |  |
> > > > |  ] range=[0x0000000000000000-0x0000000000000000] (invalid)
> > > > efi: Removing 5 invalid memory map entries.
> > > >
> > >
> > > Thanks for the report.
> > >
> > > Can you try booting with efi=no_disable_early_pci_dma passed via the
> > > kernel command line? [*]
> > >
> > Yes, that works!
> >
> > > If that does not help, can you try to reproduce with this branch?
> > >
> > > https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/log/?h=efi/urgent
> >
> > Should I give that branch a try anyway?
> >
> 
> Your test proves that BSS is not being cleared correctly, so I have
> the answer I was looking for. However, I would appreciate it if you
> could test that branch, just to double check.

I'll send efi/urgent to Linus within the next couple of hours, to get the 
fix to Linus:

  105cb9544b16: ("efi/x86: Move efi stub globals from .bss to .data")

Thanks,

	Ingo



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux