Re: [PATCH 05/13] efi/x86: don't map the entire kernel text RW for mixed mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 9 Apr 2020 at 13:25, Ard Biesheuvel <ardb@xxxxxxxxxx> wrote:
>
> On Thu, 9 Apr 2020 at 13:08, Ard Biesheuvel <ardb@xxxxxxxxxx> wrote:
> >
> > On Thu, 9 Apr 2020 at 12:45, Ard Biesheuvel <ardb@xxxxxxxxxx> wrote:
> > >
> > > On Thu, 9 Apr 2020 at 12:09, Jiri Slaby <jslaby@xxxxxxx> wrote:
> > > >
> > > > On 09. 04. 20, 11:09, Ard Biesheuvel wrote:
> > > > > On Thu, 9 Apr 2020 at 10:36, Jiri Slaby <jslaby@xxxxxxx> wrote:
> > > > >>
> > > > >> On 09. 04. 20, 10:19, Ard Biesheuvel wrote:
> > > > >>>>>> $ rpm -qlp ~/Downloads/ovmf-202002-1.1.i586.rpm
> > > > >>>>>> warning: /home/ardbie01/Downloads/ovmf-202002-1.1.i586.rpm: Header V3
> > > > >>>>>> RSA/SHA256 Signature, key ID 3dbdc284: NOKEY
> > > > >>>>>> /usr/share/doc/packages/ovmf
> > > > >>>>>> /usr/share/doc/packages/ovmf/README
> > > > >>>>>
> > > > >>>>> Hmmm, it's weird that OBS doesn't list all derived files.
> > > > >>>>> Anyway, the ia32 ovmf is available in
> > > > >>>>> http://download.opensuse.org/tumbleweed/repo/oss/noarch/qemu-ovmf-ia32-202002-1.1.noarch.rpm
> > > > >>>>
> > > > >>>> It indeed does:
> > > > >>>> https://build.opensuse.org/package/binaries/openSUSE:Factory/ovmf/standard
> > > > >>>>
> > > > >>>> Note that the ia32 version is noarch, built on i586.
> > > > >>>>
> > > > >>>
> > > > >>> I am not able to reproduce this issue using the linked firmware image
> > > > >>> and a 5.6 x86_64_defconfig with efivarfs built in.
> > > > >>
> > > > >> Yeah, I had to use the distro config too. Not sure what the trigger is.
> > > > >> Maybe some NUMA configs or something.
> > > > >>
> > > > >>> Could anyone share the full log, please, along with the kernel config
> > > > >>> that was used?
> > > > >>
> > > > >> Both uploaded:
> > > > >> http://decibel.fi.muni.cz/~xslaby/err/
> > > > >>
> > > > >
> > > > > With the same config, I am still not seeing the issue.
> > > > >
> > > > >
> > > > >> Note that I switched the for-me-necessary =m configs to =y. So that it
> > > > >> is enough to build bzImage, w/o modules...
> > > > >>
> > > > >
> > > > > Could you please try running it again with CONFIG_EFI_PGT_DUMP=y enabled?
> > > >
> > > > No problem:
> > > > http://decibel.fi.muni.cz/~xslaby/err/dmesg2.txt
> > > >
> > > > > In the mean time, I will try to install Tumbleweed from scratch. Do
> > > > > you have any steps I could follow to reproduce your setup?
> > > >
> > > > Not really, just installed TW 64-bit and used efi and grub 32 bit.
> > > >
> > >
> > > OK, so you installed using a 64-bit EFI, and then switched to a 32-bit
> > > one? Or is there a special mixed-mode capable installer?
> > >
> > > (The ones I found are x86_64 only)
> >
> > OK, I have managed to install tumbleweed into a 64-bit VM with 64-bit GRUB.
> >
> > Could you give any instructions how to convert to 32-bit GRUB please?
>
> Never mind - I managed to switch. I still don't see the issue though :-(

Success!!

[    2.416076] BUG: unable to handle page fault for address: 0000000028348e88
[    2.417698] #PF: supervisor write access in kernel mode
[    2.418697] #PF: error_code(0x0003) - permissions violation
[    2.419927] PGD fd61063 P4D fd61063 PUD fd62063 PMD 282000e1
[    2.421131] Oops: 0003 [#1] SMP PTI
[    2.421857] CPU: 3 PID: 254 Comm: systemd-system- Not tainted
5.6.0-rc4-default+ #19
[    2.423364] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009),
BIOS 0.0.0 02/06/2015
[    2.424814] RIP: 0008:0x3eaeed95
[    2.425376] Code: 8b 45 d4 8b 4d 10 8b 40 04 89 01 89 3b 50 6a 00
8b 55 0c 6a 00 8b 45 08 0f b6 4d e4 6a 01 31 f6 e8 ee c5 fc ff 83 c4
10 eb 07 <89> 03 be 05 00 00 80 a1 74 63 b1 3e 83 c0 48 e8 44 d2 ff ff
eb 05
[    2.428159] RSP: 0018:000000000fd73fa0 EFLAGS: 00010002
[    2.429012] RAX: 0000000000000001 RBX: 0000000028348e88 RCX: 000000003e9f1120
[    2.430063] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000001
[    2.431459] RBP: 000000000fd73fd8 R08: 0000000028348e88 R09: 0000000000000000
[    2.433037] R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000
[    2.433386] usb 1-2: New USB device found, idVendor=0627,
idProduct=0001, bcdDevice= 0.00
[    2.434484] R13: ffffa02f80220000 R14: 0000000000000000 R15: 0000000000000000
[    2.436404] usb 1-2: New USB device strings: Mfr=1, Product=3, SerialNumber=5
[    2.437438] FS:  00007f121439c940(0000) GS:ffff8accbd580000(0000)
knlGS:0000000000000000
[    2.438872] usb 1-2: Product: QEMU USB Tablet
[    2.439986] CS:  0008 DS: 0018 ES: 0018 CR0: 0000000080050033
[    2.439987] CR2: 0000000028348e88 CR3: 000000000fd6c005 CR4: 00000000003606e0
[    2.440878] usb 1-2: Manufacturer: QEMU
[    2.441686] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[    2.442979] usb 1-2: SerialNumber: 42
[    2.443559] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[    2.443561] Call Trace:
[    2.447302] Modules linked in:
[    2.447830] CR2: 0000000028348e88
[    2.448459] ---[ end trace 604ea22c03fc4e28 ]---



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux