From: Marc Zyngier <maz@xxxxxxxxxx> Sent: Sunday, March 15, 2020 11:16 AM
>
> On Sat, 14 Mar 2020 15:35:15 +0000,
> Michael Kelley <mikelley@xxxxxxxxxxxxx> wrote:
> >
> > Add functions to set up and remove kexec and panic
> > handlers, and to inform Hyper-V about a guest panic.
> > These functions are called from architecture independent
> > code in the VMbus driver.
> >
> > This code is built only when CONFIG_HYPERV is enabled.
> >
> > Signed-off-by: Michael Kelley <mikelley@xxxxxxxxxxxxx>
> > ---
> > arch/arm64/hyperv/hv_core.c | 61
> ++++++++++++++++++++++++++++++++++++++++++++
> > arch/arm64/hyperv/mshyperv.c | 26 +++++++++++++++++++
> > 2 files changed, 87 insertions(+)
> >
> > diff --git a/arch/arm64/hyperv/hv_core.c b/arch/arm64/hyperv/hv_core.c
> > index 4aa6b8f..8d6de9f 100644
> > --- a/arch/arm64/hyperv/hv_core.c
> > +++ b/arch/arm64/hyperv/hv_core.c
> > @@ -199,3 +199,64 @@ void hv_get_vpreg_128(u32 msr, struct
> hv_get_vp_register_output *res)
> > kfree(output);
> > }
> > EXPORT_SYMBOL_GPL(hv_get_vpreg_128);
> > +
> > +void hyperv_report_panic(struct pt_regs *regs, long err)
> > +{
> > + static bool panic_reported;
> > + u64 guest_id;
> > +
> > + /*
> > + * We prefer to report panic on 'die' chain as we have proper
> > + * registers to report, but if we miss it (e.g. on BUG()) we need
> > + * to report it on 'panic'.
> > + */
> > + if (panic_reported)
> > + return;
> > + panic_reported = true;
>
> How does this work when multiple vcpus are crashing at once? Are you
> guaranteed to be single-threaded at this point?
I'll need to go research. If not, the above should be an atomic
test-and-set.
>
> > +
> > + guest_id = hv_get_vpreg(HV_REGISTER_GUEST_OSID);
> > +
> > + /*
> > + * Hyper-V provides the ability to store only 5 values.
> > + * Pick the passed in error value, the guest_id, and the PC.
> > + * The first two general registers are added arbitrarily.
> > + */
> > + hv_set_vpreg(HV_REGISTER_CRASH_P0, err);
> > + hv_set_vpreg(HV_REGISTER_CRASH_P1, guest_id);
> > + hv_set_vpreg(HV_REGISTER_CRASH_P2, regs->pc);
> > + hv_set_vpreg(HV_REGISTER_CRASH_P3, regs->regs[0]);
> > + hv_set_vpreg(HV_REGISTER_CRASH_P4, regs->regs[1]);
>
> How about reporting useful information, a pointer to some data
> structure describing the fault? As it is, the usefulness of this is
> pretty dubious.
Yes, it is dubious. The version with more data describing the fault is
hyperv_report_panic_msg() below, which is provided by newer versions
of Hyper-V, including all versions for ARM64. So the above function
should never get called on ARM64. While we could stub it out, I'd
like to keep the notification to Hyper-V just in case
hyperv_report_panic_msg() is not available for some reason I can't
currently anticipate. The important thing is the notification, and
the register values aren't really important. I'll add a comment to
that effect.
>
> > +
> > + /*
> > + * Let Hyper-V know there is crash data available
> > + */
> > + hv_set_vpreg(HV_REGISTER_CRASH_CTL, HV_CRASH_CTL_CRASH_NOTIFY);
> > +}
> > +EXPORT_SYMBOL_GPL(hyperv_report_panic);
> > +
> > +/*
> > + * hyperv_report_panic_msg - report panic message to Hyper-V
> > + * @pa: physical address of the panic page containing the message
> > + * @size: size of the message in the page
> > + */
> > +void hyperv_report_panic_msg(phys_addr_t pa, size_t size)
> > +{
> > + /*
> > + * P3 to contain the physical address of the panic page & P4 to
> > + * contain the size of the panic data in that page. Rest of the
> > + * registers are no-op when the NOTIFY_MSG flag is set.
> > + */
> > + hv_set_vpreg(HV_REGISTER_CRASH_P0, 0);
> > + hv_set_vpreg(HV_REGISTER_CRASH_P1, 0);
> > + hv_set_vpreg(HV_REGISTER_CRASH_P2, 0);
> > + hv_set_vpreg(HV_REGISTER_CRASH_P3, pa);
> > + hv_set_vpreg(HV_REGISTER_CRASH_P4, size);
> > +
> > + /*
> > + * Let Hyper-V know there is crash data available along with
> > + * the panic message.
> > + */
> > + hv_set_vpreg(HV_REGISTER_CRASH_CTL,
> > + (HV_CRASH_CTL_CRASH_NOTIFY | HV_CRASH_CTL_CRASH_NOTIFY_MSG));
> > +}
> > +EXPORT_SYMBOL_GPL(hyperv_report_panic_msg);
> > diff --git a/arch/arm64/hyperv/mshyperv.c b/arch/arm64/hyperv/mshyperv.c
> > index ae6ece6..c58940d 100644
> > --- a/arch/arm64/hyperv/mshyperv.c
> > +++ b/arch/arm64/hyperv/mshyperv.c
> > @@ -23,6 +23,8 @@
> >
> > static void (*vmbus_handler)(void);
> > static void (*hv_stimer0_handler)(void);
> > +static void (*hv_kexec_handler)(void);
> > +static void (*hv_crash_handler)(struct pt_regs *regs);
>
> Why is this in the arch-specific code? Yes, it lives in the x86 arch
> code too, but I don't see what prevents it from being moved to the
> vmbus_drv.c code.
OK -- I'll see about moving it to arch independent code.
>
> >
> > static int vmbus_irq;
> > static long __percpu *vmbus_evt;
> > @@ -137,3 +139,27 @@ void hv_remove_stimer0_irq(int irq)
> > }
> > }
> > EXPORT_SYMBOL_GPL(hv_remove_stimer0_irq);
> > +
> > +void hv_setup_kexec_handler(void (*handler)(void))
> > +{
> > + hv_kexec_handler = handler;
> > +}
> > +EXPORT_SYMBOL_GPL(hv_setup_kexec_handler);
> > +
> > +void hv_remove_kexec_handler(void)
> > +{
> > + hv_kexec_handler = NULL;
> > +}
> > +EXPORT_SYMBOL_GPL(hv_remove_kexec_handler);
> > +
> > +void hv_setup_crash_handler(void (*handler)(struct pt_regs *regs))
> > +{
> > + hv_crash_handler = handler;
> > +}
> > +EXPORT_SYMBOL_GPL(hv_setup_crash_handler);
> > +
> > +void hv_remove_crash_handler(void)
> > +{
> > + hv_crash_handler = NULL;
> > +}
> > +EXPORT_SYMBOL_GPL(hv_remove_crash_handler);
> > --
> > 1.8.3.1
> >
> >
>
> Thanks,
>
> M.
>
> --
> Jazz is not dead, it just smells funny.
