Re: [RFC PATCH 4/5] RISC-V: Add PE/COFF header for EFI stub

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2020-02-26 at 08:14 +0100, Ard Biesheuvel wrote:
> On Wed, 26 Feb 2020 at 02:10, Atish Patra <atish.patra@xxxxxxx>
> wrote:
> > Linux kernel Image can appear as an EFI application With
> > appropriate
> > PE/COFF header fields in the beginning of the Image header. An EFI
> > application loader can directly load a Linux kernel Image and an
> > EFI
> > stub residing in kernel can boot Linux kernel directly.
> > 
> > Add the necessary PE/COFF header.
> > 
> > Signed-off-by: Atish Patra <atish.patra@xxxxxxx>
> > ---
> >  arch/riscv/include/asm/Kbuild     |   1 -
> >  arch/riscv/include/asm/sections.h |  13 ++++
> >  arch/riscv/kernel/Makefile        |   4 ++
> >  arch/riscv/kernel/efi-header.S    | 107
> > ++++++++++++++++++++++++++++++
> >  arch/riscv/kernel/head.S          |  15 +++++
> >  arch/riscv/kernel/image-vars.h    |  52 +++++++++++++++
> >  arch/riscv/kernel/vmlinux.lds.S   |  27 ++++++--
> >  7 files changed, 212 insertions(+), 7 deletions(-)
> >  create mode 100644 arch/riscv/include/asm/sections.h
> >  create mode 100644 arch/riscv/kernel/efi-header.S
> >  create mode 100644 arch/riscv/kernel/image-vars.h
> > 
> > diff --git a/arch/riscv/include/asm/Kbuild
> > b/arch/riscv/include/asm/Kbuild
> > index 517394390106..ef797fe44934 100644
> > --- a/arch/riscv/include/asm/Kbuild
> > +++ b/arch/riscv/include/asm/Kbuild
> > @@ -24,7 +24,6 @@ generic-y += local64.h
> >  generic-y += mm-arch-hooks.h
> >  generic-y += percpu.h
> >  generic-y += preempt.h
> > -generic-y += sections.h
> >  generic-y += serial.h
> >  generic-y += shmparam.h
> >  generic-y += topology.h
> > diff --git a/arch/riscv/include/asm/sections.h
> > b/arch/riscv/include/asm/sections.h
> > new file mode 100644
> > index 000000000000..3a9971b1210f
> > --- /dev/null
> > +++ b/arch/riscv/include/asm/sections.h
> > @@ -0,0 +1,13 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (C) 2020 Western Digital Corporation or its
> > affiliates.
> > + */
> > +#ifndef __ASM_SECTIONS_H
> > +#define __ASM_SECTIONS_H
> > +
> > +#include <asm-generic/sections.h>
> > +
> > +extern char _start[];
> > +extern char _start_kernel[];
> > +
> > +#endif /* __ASM_SECTIONS_H */
> > diff --git a/arch/riscv/kernel/Makefile
> > b/arch/riscv/kernel/Makefile
> > index 9601ac907f70..471b1c73f77d 100644
> > --- a/arch/riscv/kernel/Makefile
> > +++ b/arch/riscv/kernel/Makefile
> > @@ -29,6 +29,10 @@ obj-y        += cacheinfo.o
> >  obj-$(CONFIG_MMU) += vdso.o vdso/
> > 
> >  obj-$(CONFIG_RISCV_M_MODE)     += clint.o
> > +OBJCOPYFLAGS := --prefix-symbols=__efistub_
> > +$(obj)/%.stub.o: $(obj)/%.o FORCE
> > +       $(call if_changed,objcopy)
> > +
> >  obj-$(CONFIG_FPU)              += fpu.o
> >  obj-$(CONFIG_SMP)              += smpboot.o
> >  obj-$(CONFIG_SMP)              += smp.o
> > diff --git a/arch/riscv/kernel/efi-header.S
> > b/arch/riscv/kernel/efi-header.S
> > new file mode 100644
> > index 000000000000..af959e748d93
> > --- /dev/null
> > +++ b/arch/riscv/kernel/efi-header.S
> > @@ -0,0 +1,107 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Copyright (C) 2019 Western Digital Corporation or its
> > affiliates.
> > + * Adapted from arch/arm64/kernel/efi-header.S
> > + */
> > +
> > +#include <linux/pe.h>
> > +#include <linux/sizes.h>
> > +
> > +       .macro  __EFI_PE_HEADER
> > +       .long   PE_MAGIC
> > +coff_header:
> > +       .short  IMAGE_FILE_MACHINE_RISCV64              // Machine
> > +       .short  section_count                           //
> > NumberOfSections
> > +       .long   0                                       //
> > TimeDateStamp
> > +       .long   0                                       //
> > PointerToSymbolTable
> > +       .long   0                                       //
> > NumberOfSymbols
> > +       .short  section_table - optional_header         //
> > SizeOfOptionalHeader
> > +       .short  IMAGE_FILE_DEBUG_STRIPPED | \
> > +               IMAGE_FILE_EXECUTABLE_IMAGE | \
> > +               IMAGE_FILE_LINE_NUMS_STRIPPED           //
> > Characteristics
> > +
> > +optional_header:
> > +       .short  PE_OPT_MAGIC_PE32PLUS                   // PE32+
> > format
> > +       .byte   0x02                                    //
> > MajorLinkerVersion
> > +       .byte   0x14                                    //
> > MinorLinkerVersion
> > +       .long   __text_end - efi_header_end             //
> > SizeOfCode
> > +       .long   _end - __text_end                       //
> > SizeOfInitializedData
> > +       .long   0                                       //
> > SizeOfUninitializedData
> > +       .long   __efistub_efi_entry - _start            //
> > AddressOfEntryPoint
> > +       .long   efi_header_end - _start                 //
> > BaseOfCode
> > +
> > +extra_header_fields:
> > +       .quad   0                                       //
> > ImageBase
> > +       .long   SZ_4K                                   //
> > SectionAlignment
> > +       .long   PECOFF_FILE_ALIGNMENT                   //
> > FileAlignment
> > +       .short  0                                       //
> > MajorOperatingSystemVersion
> > +       .short  0                                       //
> > MinorOperatingSystemVersion
> > +       .short  0                                       //
> > MajorImageVersion
> > +       .short  0                                       //
> > MinorImageVersion
> 
> Put LINUX_EFISTUB_MAJOR_VERSION and LINUX_EFISTUB_MINOR_VERSION here
> 

Sure.

> > +       .short  0                                       //
> > MajorSubsystemVersion
> > +       .short  0                                       //
> > MinorSubsystemVersion
> > +       .long   0                                       //
> > Win32VersionValue
> > +
> > +       .long   _end - _start                           //
> > SizeOfImage
> > +
> > +       // Everything before the kernel image is considered part of
> > the header
> > +       .long   efi_header_end - _start                 //
> > SizeOfHeaders
> > +       .long   0                                       // CheckSum
> > +       .short  IMAGE_SUBSYSTEM_EFI_APPLICATION         //
> > Subsystem
> > +       .short  0                                       //
> > DllCharacteristics
> > +       .quad   0                                       //
> > SizeOfStackReserve
> > +       .quad   0                                       //
> > SizeOfStackCommit
> > +       .quad   0                                       //
> > SizeOfHeapReserve
> > +       .quad   0                                       //
> > SizeOfHeapCommit
> > +       .long   0                                       //
> > LoaderFlags
> > +       .long   (section_table - .) / 8                 //
> > NumberOfRvaAndSizes
> > +
> > +       .quad   0                                       //
> > ExportTable
> > +       .quad   0                                       //
> > ImportTable
> > +       .quad   0                                       //
> > ResourceTable
> > +       .quad   0                                       //
> > ExceptionTable
> > +       .quad   0                                       //
> > CertificationTable
> > +       .quad   0                                       //
> > BaseRelocationTable
> > +
> > +       // Section table
> > +section_table:
> > +       .ascii  ".text\0\0\0"
> > +       .long   __text_end - efi_header_end             //
> > VirtualSize
> > +       .long   efi_header_end - _start                 //
> > VirtualAddress
> > +       .long   __text_end - efi_header_end             //
> > SizeOfRawData
> > +       .long   efi_header_end - _start                 //
> > PointerToRawData
> > +
> > +       .long   0                                       //
> > PointerToRelocations
> > +       .long   0                                       //
> > PointerToLineNumbers
> > +       .short  0                                       //
> > NumberOfRelocations
> > +       .short  0                                       //
> > NumberOfLineNumbers
> > +       .long   IMAGE_SCN_CNT_CODE | \
> > +               IMAGE_SCN_MEM_READ | \
> > +               IMAGE_SCN_MEM_EXECUTE                   //
> > Characteristics
> > +
> > +       .ascii  ".data\0\0\0"
> > +       .long   __data_virt_size                        //
> > VirtualSize
> > +       .long   __text_end - _start                     //
> > VirtualAddress
> > +       .long   __data_raw_size                         //
> > SizeOfRawData
> > +       .long   __text_end - _start                     //
> > PointerToRawData
> > +
> > +       .long   0                                       //
> > PointerToRelocations
> > +       .long   0                                       //
> > PointerToLineNumbers
> > +       .short  0                                       //
> > NumberOfRelocations
> > +       .short  0                                       //
> > NumberOfLineNumbers
> > +       .long   IMAGE_SCN_CNT_INITIALIZED_DATA | \
> > +               IMAGE_SCN_MEM_READ | \
> > +               IMAGE_SCN_MEM_WRITE                     //
> > Characteristics
> > +
> > +       .set    section_count, (. - section_table) / 40
> > +
> 
> You dropped the debug header here, which is actually *very* useful if
> you want to single step through the stub from DEBUG edk2 firmware.
> 

Ahh I see. I was not sure how to use the debug feature :). Can we do
the same in U-boot ? 

How about adding it back later once I can verify it with EDK2 ?

> > +       /*
> > +        * EFI will load .text onwards at the 4k section alignment
> > +        * described in the PE/COFF header. To ensure that
> > instruction
> > +        * sequences using an adrp and a :lo12: immediate will
> > function
> 
> Surely, this is inaccurate for RISC-V?

Sorry. I should have removed the comment. We keep the the _start and 
.head.text section aligned to a PAGE_SIZE anyways using the linker
script.
> 
> > +        * correctly at this alignment, we must ensure that .text
> > is
> > +        * placed at a 4k boundary in the Image to begin with.
> > +        */
> > +       .align 12
> > +efi_header_end:
> > +       .endm
> > diff --git a/arch/riscv/kernel/head.S b/arch/riscv/kernel/head.S
> > index ac5b0e0a02f6..835dc76de285 100644
> > --- a/arch/riscv/kernel/head.S
> > +++ b/arch/riscv/kernel/head.S
> > @@ -13,6 +13,7 @@
> >  #include <asm/csr.h>
> >  #include <asm/hwcap.h>
> >  #include <asm/image.h>
> > +#include "efi-header.S"
> > 
> >  __HEAD
> >  ENTRY(_start)
> > @@ -22,10 +23,17 @@ ENTRY(_start)
> >          * Do not modify it without modifying the structure and all
> > bootloaders
> >          * that expects this header format!!
> >          */
> > +#ifdef CONFIG_EFI
> > +       /*
> > +        * This instruction decodes to "MZ" ASCII required by UEFI.
> > +        */
> > +       li s4,-13
> 
> What happens if you try to do plain boot on an EFI kernel? On ARM and
> x86, we took care to use a 'MZ' opcode that behaves as a pseudo-NOP,
> and jump to start_kernel right after, so if you boot the EFI kernel
> as
> a normal kernel, it still works.
> 

There should have been a "j _start_kernel" after the "MZ" ascii. I just
tested EFI kernel can now boot as a normal kernel as well with that
change. Thanks for pointing that out.

> > +#else
> >         /* jump to start kernel */
> >         j _start_kernel
> >         /* reserved */
> >         .word 0
> > +#endif
> >         .balign 8
> >  #if __riscv_xlen == 64
> >         /* Image load offset(2MB) from start of RAM */
> > @@ -43,7 +51,14 @@ ENTRY(_start)
> >         .ascii RISCV_IMAGE_MAGIC
> >         .balign 4
> >         .ascii RISCV_IMAGE_MAGIC2
> > +#ifdef CONFIG_EFI
> > +       .word pe_head_start - _start
> > +pe_head_start:
> > +
> > +       __EFI_PE_HEADER
> > +#else
> >         .word 0
> > +#endif
> > 
> >  .align 2
> >  #ifdef CONFIG_MMU
> > diff --git a/arch/riscv/kernel/image-vars.h
> > b/arch/riscv/kernel/image-vars.h
> > new file mode 100644
> > index 000000000000..57abb85065e9
> > --- /dev/null
> > +++ b/arch/riscv/kernel/image-vars.h
> > @@ -0,0 +1,52 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * Linker script variables to be set after section resolution, as
> > + * ld.lld does not like variables assigned before SECTIONS is
> > processed.
> > + * Based on arch/arm64/kerne/image-vars.h
> > + */
> > +#ifndef __RISCV_KERNEL_IMAGE_VARS_H
> > +#define __RISCV_KERNEL_IMAGE_VARS_H
> > +
> > +#ifndef LINKER_SCRIPT
> > +#error This file should only be included in vmlinux.lds.S
> > +#endif
> > +
> > +#ifdef CONFIG_EFI
> > +
> > +__efistub_stext_offset = _start_kernel - _start;
> > +
> > +/*
> > + * The EFI stub has its own symbol namespace prefixed by
> > __efistub_, to
> > + * isolate it from the kernel proper. The following symbols are
> > legally
> > + * accessed by the stub, so provide some aliases to make them
> > accessible.
> > + * Only include data symbols here, or text symbols of functions
> > that are
> > + * guaranteed to be safe when executed at another offset than they
> > were
> > + * linked at. The routines below are all implemented in assembler
> > in a
> > + * position independent manner
> > + */
> > +__efistub_memcmp               = memcmp;
> > +__efistub_memchr               = memchr;
> > +__efistub_memcpy               = memcpy;
> > +__efistub_memmove              = memmove;
> > +__efistub_memset               = memset;
> > +__efistub_strlen               = strlen;
> > +__efistub_strnlen              = strnlen;
> > +__efistub_strcmp               = strcmp;
> > +__efistub_strncmp              = strncmp;
> > +__efistub_strrchr              = strrchr;
> > +
> > +#ifdef CONFIG_KASAN
> > +__efistub___memcpy             = memcpy;
> > +__efistub___memmove            = memmove;
> > +__efistub___memset             = memset;
> > +#endif
> > +
> > +__efistub__start               = _start;
> > +__efistub__start_kernel                = _start_kernel;
> > +__efistub__end                 = _end;
> > +__efistub__edata               = _edata;
> > +__efistub_screen_info          = screen_info;
> > +
> > +#endif
> > +
> > +#endif /* __RISCV_KERNEL_IMAGE_VARS_H */
> > diff --git a/arch/riscv/kernel/vmlinux.lds.S
> > b/arch/riscv/kernel/vmlinux.lds.S
> > index b32640300d07..933b9e9a4b39 100644
> > --- a/arch/riscv/kernel/vmlinux.lds.S
> > +++ b/arch/riscv/kernel/vmlinux.lds.S
> > @@ -9,6 +9,7 @@
> >  #include <asm/page.h>
> >  #include <asm/cache.h>
> >  #include <asm/thread_info.h>
> > +#include "image-vars.h"
> > 
> >  #include <linux/sizes.h>
> >  OUTPUT_ARCH(riscv)
> > @@ -16,6 +17,14 @@ ENTRY(_start)
> > 
> >  jiffies = jiffies_64;
> > 
> > +PECOFF_FILE_ALIGNMENT = 0x200;
> > +#ifdef CONFIG_EFI
> > +#define PECOFF_EDATA_PADDING   \
> > +       .pecoff_edata_padding : { BYTE(0); . =
> > ALIGN(PECOFF_FILE_ALIGNMENT); }
> > +#else
> > +#define PECOFF_EDATA_PADDING
> > +#endif
> > +
> >  SECTIONS
> >  {
> >         /* Beginning of code and text segment */
> > @@ -26,12 +35,15 @@ SECTIONS
> > 
> >         __init_begin = .;
> >         INIT_TEXT_SECTION(PAGE_SIZE)
> > +
> > +       /* Start of data section */
> >         INIT_DATA_SECTION(16)
> >         /* we have to discard exit text and such at runtime, not
> > link time */
> >         .exit.text :
> >         {
> >                 EXIT_TEXT
> >         }
> > +
> >         .exit.data :
> >         {
> >                 EXIT_DATA
> > @@ -54,7 +66,8 @@ SECTIONS
> >                 _etext = .;
> >         }
> > 
> > -       /* Start of data section */
> > +       __text_end = .;
> > +
> >         _sdata = .;
> >         RO_DATA(L1_CACHE_BYTES)
> >         .srodata : {
> > @@ -65,19 +78,21 @@ SECTIONS
> >         .sdata : {
> >                 __global_pointer$ = . + 0x800;
> >                 *(.sdata*)
> > -               /* End of data section */
> > -               _edata = .;
> >                 *(.sbss*)
> >         }
> > -
> > -       BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> > -
> > +       PECOFF_EDATA_PADDING
> > +       __data_raw_size = ABSOLUTE(. - __text_end);
> > +       /* End of data section */
> > +       _edata = .;
> >         EXCEPTION_TABLE(0x10)
> > 
> >         .rel.dyn : {
> >                 *(.rel.dyn*)
> >         }
> > 
> > +       BSS_SECTION(PAGE_SIZE, PAGE_SIZE, 0)
> > +       __data_virt_size = ABSOLUTE(. - __text_end);
> > +
> >         _end = .;
> > 
> >         STABS_DEBUG
> > --
> > 2.24.0
> > 

-- 
Regards,
Atish




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux