[PATCH 1/2] ARM: decompressor: prepare cache_clean_flush for doing by-VA maintenance

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



In preparation of turning the decompressor's cache clean/flush
operations into proper by-VA maintenance for v7 cores, pass the
start and end addresses of the regions that need cache maintenance
into cache_clean_flush in registers r0 and r1.

Currently, all implementations of cache_clean_flush ignore these
values, so no functional change is expected as a result of this
patch.

Signed-off-by: Ard Biesheuvel <ardb@xxxxxxxxxx>
---
 arch/arm/boot/compressed/head.S | 28 +++++++++++++++++---
 1 file changed, 25 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 7b86a2e1acce..935799b92198 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -525,12 +525,15 @@ dtb_check_done:
 		/* cache_clean_flush may use the stack, so relocate it */
 		add	sp, sp, r6
 #endif
-
+		mov	r0, r9
+		ldr	r1, 0f
+		add	r1, r1, r0
 		bl	cache_clean_flush
 
 		badr	r0, restart
 		add	r0, r0, r6
 		mov	pc, r0
+0:		.long	_edata - restart
 
 wont_overwrite:
 /*
@@ -622,6 +625,21 @@ not_relocated:	mov	r0, #0
 		add	r2, sp, #0x10000	@ 64k max
 		mov	r3, r7
 		bl	decompress_kernel
+
+		mov	r0, r4			@ base of inflated image
+		adr	r1, LC0			@ actual LC0
+		ldr	r2, [r1]		@ linktime LC0
+		sub	r2, r1, r2		@ LC0 delta
+		ldr	r1, [r1, #16]		@ link time inflated size offset
+		ldr	r1, [r1, r2]		@ actual inflated size (LE)
+#ifdef __ARMEB__
+		/* convert to big endian */
+		eor	r2, r1, r1, ror #16
+		bic	r2, r2, #0x00ff0000
+		mov	r1, r1, ror #8
+		eor	r1, r1, r2, lsr #8
+#endif
+		add	r1, r1, r0		@ end of inflated image
 		bl	cache_clean_flush
 		bl	cache_off
 
@@ -1439,6 +1457,7 @@ reloc_code_end:
 #ifdef CONFIG_EFI_STUB
 		.align	2
 _start:		.long	start - .
+__edata:	.long	_edata - .
 
 ENTRY(efi_stub_entry)
 		@ allocate space on stack for passing current zImage address
@@ -1470,8 +1489,11 @@ ENTRY(efi_stub_entry)
 		.align	2
 0:		.long	start - (. + 4)
 
-		@ Preserve return value of efi_entry() in r4
-		mov	r4, r0
+		mov	r4, r0				@ preserve DTB pointer
+		mov	r0, r1				@ start of image
+		adr	r2, __edata
+		ldr	r1, [r2]
+		add	r1, r1, r2			@ end of image
 		bl	cache_clean_flush
 		bl	cache_off
 
-- 
2.17.1




[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux