Re: [PATCH 3/8] efi: Decode IA32/X64 Processor Error Info Structure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 23 February 2018 at 20:03, Yazen Ghannam <Yazen.Ghannam@xxxxxxx> wrote:
> From: Yazen Ghannam <yazen.ghannam@xxxxxxx>
>
> Print the fields in the IA32/X64 Processor Error Info Structure.
>
> Based on UEFI 2.7 Table 256. IA32/X64 Processor Error Information
> Structure.
>
> Cc: <stable@xxxxxxxxxxxxxxx> # 4.16.x
> Signed-off-by: Yazen Ghannam <yazen.ghannam@xxxxxxx>
> ---
>  drivers/firmware/efi/cper-x86.c | 53 +++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 53 insertions(+)
>
> diff --git a/drivers/firmware/efi/cper-x86.c b/drivers/firmware/efi/cper-x86.c
> index b50ee3cdf637..9d608f742c98 100644
> --- a/drivers/firmware/efi/cper-x86.c
> +++ b/drivers/firmware/efi/cper-x86.c
> @@ -4,15 +4,28 @@
>
>  #include <linux/cper.h>
>
> +#define INDENT_SP      " "
> +
>  /*
>   * We don't need a "CPER_IA" prefix since these are all locally defined.
>   * This will save us a lot of line space.
>   */
>  #define VALID_LAPIC_ID                 BIT_ULL(0)
>  #define VALID_CPUID_INFO               BIT_ULL(1)
> +#define VALID_PROC_ERR_INFO_NUM(bits)  ((bits & GENMASK_ULL(7, 2)) >> 2)
> +

Parens around 'bits' please

> +#define INFO_VALID_CHECK_INFO          BIT_ULL(0)
> +#define INFO_VALID_TARGET_ID           BIT_ULL(1)
> +#define INFO_VALID_REQUESTOR_ID                BIT_ULL(2)
> +#define INFO_VALID_RESPONDER_ID                BIT_ULL(3)
> +#define INFO_VALID_IP                  BIT_ULL(4)
>
>  void cper_print_proc_ia(const char *pfx, const struct cper_sec_proc_ia *proc)
>  {
> +       int i;
> +       struct cper_ia_err_info *err_info;
> +       char newpfx[64];
> +
>         printk("%sValidation Bits: 0x%016llx\n", pfx, proc->validation_bits);
>
>         if (proc->validation_bits & VALID_LAPIC_ID)
> @@ -23,4 +36,44 @@ void cper_print_proc_ia(const char *pfx, const struct cper_sec_proc_ia *proc)
>                 print_hex_dump(pfx, "", DUMP_PREFIX_OFFSET, 16, 4, proc->cpuid,
>                                sizeof(proc->cpuid), 0);
>         }
> +
> +       snprintf(newpfx, sizeof(newpfx), "%s%s", pfx, INDENT_SP);
> +
> +       err_info = (struct cper_ia_err_info *)(proc + 1);
> +       for (i = 0; i < VALID_PROC_ERR_INFO_NUM(proc->validation_bits); i++) {
> +               printk("%sError Information Structure %d:\n", pfx, i);
> +
> +               printk("%sError Structure Type: %pUl\n", newpfx,
> +                        &err_info->err_type);
> +

The indentation is a bit awkward here. Could you please align followup
lines with the character following the ( on the first line?

> +               printk("%sValidation Bits: 0x%016llx\n",
> +                        newpfx, err_info->validation_bits);
> +
> +               if (err_info->validation_bits & INFO_VALID_CHECK_INFO) {
> +                       printk("%sCheck Information: 0x%016llx\n", newpfx,
> +                                err_info->check_info);
> +               }
> +
> +               if (err_info->validation_bits & INFO_VALID_TARGET_ID) {
> +                       printk("%sTarget Identifier: 0x%016llx\n",
> +                                newpfx, err_info->target_id);
> +               }
> +
> +               if (err_info->validation_bits & INFO_VALID_REQUESTOR_ID) {
> +                       printk("%sRequestor Identifier: 0x%016llx\n",
> +                                newpfx, err_info->requestor_id);
> +               }
> +
> +               if (err_info->validation_bits & INFO_VALID_RESPONDER_ID) {
> +                       printk("%sResponder Identifier: 0x%016llx\n",
> +                                newpfx, err_info->responder_id);
> +               }
> +
> +               if (err_info->validation_bits & INFO_VALID_IP) {
> +                       printk("%sInstruction Pointer: 0x%016llx\n",
> +                                newpfx, err_info->ip);
> +               }
> +
> +               err_info++;
> +       }
>  }
> --
> 2.14.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux ARM Kernel]     [Linux ARM]     [Linux Omap]     [Fedora ARM]     [IETF Annouce]     [Security]     [Bugtraq]     [Linux OMAP]     [Linux MIPS]     [ECOS]     [Asterisk Internet PBX]     [Linux API]

  Powered by Linux