On Sun, Dec 24, 2017 at 01:21:02AM +0530, Bhupesh Sharma wrote: > On Fri, Dec 22, 2017 at 2:03 PM, AKASHI Takahiro > <takahiro.akashi@xxxxxxxxxx> wrote: > > On Thu, Dec 21, 2017 at 05:36:30PM +0530, Bhupesh Sharma wrote: > >> Hello Akashi, > >> > >> On Thu, Dec 21, 2017 at 4:04 PM, AKASHI Takahiro > >> <takahiro.akashi@xxxxxxxxxx> wrote: > >> > Bhupesh, > >> > > >> > Can you test the patch attached below, please? > >> > > >> > It is intended to retain already-reserved regions (ACPI reclaim memory > >> > in this case) in system ram (i.e. memblock.memory) without explicitly > >> > exporting them via usable-memory-range. > >> > (I still have to figure out what the side-effect of this patch is.) > >> > > >> > Thanks, > >> > -Takahiro AKASHI > >> > > >> > On Thu, Dec 21, 2017 at 01:30:43AM +0530, Bhupesh Sharma wrote: > >> >> On Tue, Dec 19, 2017 at 6:39 PM, Ard Biesheuvel > >> >> <ard.biesheuvel@xxxxxxxxxx> wrote: > >> >> > On 19 December 2017 at 07:09, AKASHI Takahiro > >> >> > <takahiro.akashi@xxxxxxxxxx> wrote: > >> >> >> On Mon, Dec 18, 2017 at 01:40:09PM +0800, Dave Young wrote: > >> >> >>> On 12/15/17 at 05:59pm, AKASHI Takahiro wrote: > >> >> >>> > On Wed, Dec 13, 2017 at 12:17:22PM +0000, Ard Biesheuvel wrote: > >> >> >>> > > On 13 December 2017 at 12:16, AKASHI Takahiro > >> >> >>> > > <takahiro.akashi@xxxxxxxxxx> wrote: > >> >> >>> > > > On Wed, Dec 13, 2017 at 10:49:27AM +0000, Ard Biesheuvel wrote: > >> >> >>> > > >> On 13 December 2017 at 10:26, AKASHI Takahiro > >> >> >>> > > >> <takahiro.akashi@xxxxxxxxxx> wrote: > >> >> >>> > > >> > Bhupesh, Ard, > >> >> >>> > > >> > > >> >> >>> > > >> > On Wed, Dec 13, 2017 at 03:21:59AM +0530, Bhupesh Sharma wrote: > >> >> >>> > > >> >> Hi Ard, Akashi > >> >> >>> > > >> >> > >> >> >>> > > >> > (snip) > >> >> >>> > > >> > > >> >> >>> > > >> >> Looking deeper into the issue, since the arm64 kexec-tools uses the > >> >> >>> > > >> >> 'linux,usable-memory-range' dt property to allow crash dump kernel to > >> >> >>> > > >> >> identify its own usable memory and exclude, at its boot time, any > >> >> >>> > > >> >> other memory areas that are part of the panicked kernel's memory. > >> >> >>> > > >> >> (see https://www.kernel.org/doc/Documentation/devicetree/bindings/chosen.txt > >> >> >>> > > >> >> , for details) > >> >> >>> > > >> > > >> >> >>> > > >> > Right. > >> >> >>> > > >> > > >> >> >>> > > >> >> 1). Now when 'kexec -p' is executed, this node is patched up only > >> >> >>> > > >> >> with the crashkernel memory range: > >> >> >>> > > >> >> > >> >> >>> > > >> >> /* add linux,usable-memory-range */ > >> >> >>> > > >> >> nodeoffset = fdt_path_offset(new_buf, "/chosen"); > >> >> >>> > > >> >> result = fdt_setprop_range(new_buf, nodeoffset, > >> >> >>> > > >> >> PROP_USABLE_MEM_RANGE, &crash_reserved_mem, > >> >> >>> > > >> >> address_cells, size_cells); > >> >> >>> > > >> >> > >> >> >>> > > >> >> (see https://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git/tree/kexec/arch/arm64/kexec-arm64.c#n465 > >> >> >>> > > >> >> , for details) > >> >> >>> > > >> >> > >> >> >>> > > >> >> 2). This excludes the ACPI reclaim regions irrespective of whether > >> >> >>> > > >> >> they are marked as System RAM or as RESERVED. As, > >> >> >>> > > >> >> 'linux,usable-memory-range' dt node is patched up only with > >> >> >>> > > >> >> 'crash_reserved_mem' and not 'system_memory_ranges' > >> >> >>> > > >> >> > >> >> >>> > > >> >> 3). As a result when the crashkernel boots up it doesn't find this > >> >> >>> > > >> >> ACPI memory and crashes while trying to access the same: > >> >> >>> > > >> >> > >> >> >>> > > >> >> # kexec -p /boot/vmlinuz-`uname -r` --initrd=/boot/initramfs-`uname > >> >> >>> > > >> >> -r`.img --reuse-cmdline -d > >> >> >>> > > >> >> > >> >> >>> > > >> >> [snip..] > >> >> >>> > > >> >> > >> >> >>> > > >> >> Reserved memory range > >> >> >>> > > >> >> 000000000e800000-000000002e7fffff (0) > >> >> >>> > > >> >> > >> >> >>> > > >> >> Coredump memory ranges > >> >> >>> > > >> >> 0000000000000000-000000000e7fffff (0) > >> >> >>> > > >> >> 000000002e800000-000000003961ffff (0) > >> >> >>> > > >> >> 0000000039d40000-000000003ed2ffff (0) > >> >> >>> > > >> >> 000000003ed60000-000000003fbfffff (0) > >> >> >>> > > >> >> 0000001040000000-0000001ffbffffff (0) > >> >> >>> > > >> >> 0000002000000000-0000002ffbffffff (0) > >> >> >>> > > >> >> 0000009000000000-0000009ffbffffff (0) > >> >> >>> > > >> >> 000000a000000000-000000affbffffff (0) > >> >> >>> > > >> >> > >> >> >>> > > >> >> 4). So if we revert Ard's patch or just comment the fixing up of the > >> >> >>> > > >> >> memory cap'ing passed to the crash kernel inside > >> >> >>> > > >> >> 'arch/arm64/mm/init.c' (see below): > >> >> >>> > > >> >> > >> >> >>> > > >> >> static void __init fdt_enforce_memory_region(void) > >> >> >>> > > >> >> { > >> >> >>> > > >> >> struct memblock_region reg = { > >> >> >>> > > >> >> .size = 0, > >> >> >>> > > >> >> }; > >> >> >>> > > >> >> > >> >> >>> > > >> >> of_scan_flat_dt(early_init_dt_scan_usablemem, ®); > >> >> >>> > > >> >> > >> >> >>> > > >> >> if (reg.size) > >> >> >>> > > >> >> //memblock_cap_memory_range(reg.base, reg.size); /* > >> >> >>> > > >> >> comment this out */ > >> >> >>> > > >> >> } > >> >> >>> > > >> > > >> >> >>> > > >> > Please just don't do that. It can cause a fatal damage on > >> >> >>> > > >> > memory contents of the *crashed* kernel. > >> >> >>> > > >> > > >> >> >>> > > >> >> 5). Both the above temporary solutions fix the problem. > >> >> >>> > > >> >> > >> >> >>> > > >> >> 6). However exposing all System RAM regions to the crashkernel is not > >> >> >>> > > >> >> advisable and may cause the crashkernel or some crashkernel drivers to > >> >> >>> > > >> >> fail. > >> >> >>> > > >> >> > >> >> >>> > > >> >> 6a). I am trying an approach now, where the ACPI reclaim regions are > >> >> >>> > > >> >> added to '/proc/iomem' separately as ACPI reclaim regions by the > >> >> >>> > > >> >> kernel code and on the other hand the user-space 'kexec-tools' will > >> >> >>> > > >> >> pick up the ACPI reclaim regions from '/proc/iomem' and add it to the > >> >> >>> > > >> >> dt node 'linux,usable-memory-range' > >> >> >>> > > >> > > >> >> >>> > > >> > I still don't understand why we need to carry over the information > >> >> >>> > > >> > about "ACPI Reclaim memory" to crash dump kernel. In my understandings, > >> >> >>> > > >> > such regions are free to be reused by the kernel after some point of > >> >> >>> > > >> > initialization. Why does crash dump kernel need to know about them? > >> >> >>> > > >> > > >> >> >>> > > >> > >> >> >>> > > >> Not really. According to the UEFI spec, they can be reclaimed after > >> >> >>> > > >> the OS has initialized, i.e., when it has consumed the ACPI tables and > >> >> >>> > > >> no longer needs them. Of course, in order to be able to boot a kexec > >> >> >>> > > >> kernel, those regions needs to be preserved, which is why they are > >> >> >>> > > >> memblock_reserve()'d now. > >> >> >>> > > > > >> >> >>> > > > For my better understandings, who is actually accessing such regions > >> >> >>> > > > during boot time, uefi itself or efistub? > >> >> >>> > > > > >> >> >>> > > > >> >> >>> > > No, only the kernel. This is where the ACPI tables are stored. For > >> >> >>> > > instance, on QEMU we have > >> >> >>> > > > >> >> >>> > > ACPI: RSDP 0x0000000078980000 000024 (v02 BOCHS ) > >> >> >>> > > ACPI: XSDT 0x0000000078970000 000054 (v01 BOCHS BXPCFACP 00000001 > >> >> >>> > > 01000013) > >> >> >>> > > ACPI: FACP 0x0000000078930000 00010C (v05 BOCHS BXPCFACP 00000001 > >> >> >>> > > BXPC 00000001) > >> >> >>> > > ACPI: DSDT 0x0000000078940000 0011DA (v02 BOCHS BXPCDSDT 00000001 > >> >> >>> > > BXPC 00000001) > >> >> >>> > > ACPI: APIC 0x0000000078920000 000140 (v03 BOCHS BXPCAPIC 00000001 > >> >> >>> > > BXPC 00000001) > >> >> >>> > > ACPI: GTDT 0x0000000078910000 000060 (v02 BOCHS BXPCGTDT 00000001 > >> >> >>> > > BXPC 00000001) > >> >> >>> > > ACPI: MCFG 0x0000000078900000 00003C (v01 BOCHS BXPCMCFG 00000001 > >> >> >>> > > BXPC 00000001) > >> >> >>> > > ACPI: SPCR 0x00000000788F0000 000050 (v02 BOCHS BXPCSPCR 00000001 > >> >> >>> > > BXPC 00000001) > >> >> >>> > > ACPI: IORT 0x00000000788E0000 00007C (v00 BOCHS BXPCIORT 00000001 > >> >> >>> > > BXPC 00000001) > >> >> >>> > > > >> >> >>> > > covered by > >> >> >>> > > > >> >> >>> > > efi: 0x0000788e0000-0x00007894ffff [ACPI Reclaim Memory ...] > >> >> >>> > > ... > >> >> >>> > > efi: 0x000078970000-0x00007898ffff [ACPI Reclaim Memory ...] > >> >> >>> > > >> >> >>> > OK. I mistakenly understood those regions could be freed after exiting > >> >> >>> > UEFI boot services. > >> >> >>> > > >> >> >>> > > > >> >> >>> > > >> So it seems that kexec does not honour the memblock_reserve() table > >> >> >>> > > >> when booting the next kernel. > >> >> >>> > > > > >> >> >>> > > > not really. > >> >> >>> > > > > >> >> >>> > > >> > (In other words, can or should we skip some part of ACPI-related init code > >> >> >>> > > >> > on crash dump kernel?) > >> >> >>> > > >> > > >> >> >>> > > >> > >> >> >>> > > >> I don't think so. And the change to the handling of ACPI reclaim > >> >> >>> > > >> regions only revealed the bug, not created it (given that other > >> >> >>> > > >> memblock_reserve regions may be affected as well) > >> >> >>> > > > > >> >> >>> > > > As whether we should honor such reserved regions over kexec'ing > >> >> >>> > > > depends on each one's specific nature, we will have to take care one-by-one. > >> >> >>> > > > As a matter of fact, no information about "reserved" memblocks is > >> >> >>> > > > exposed to user space (via proc/iomem). > >> >> >>> > > > > >> >> >>> > > > >> >> >>> > > That is why I suggested (somewhere in this thread?) to not expose them > >> >> >>> > > as 'System RAM'. Do you think that could solve this? > >> >> >>> > > >> >> >>> > Memblock-reserv'ing them is necessary to prevent their corruption and > >> >> >>> > marking them under another name in /proc/iomem would also be good in order > >> >> >>> > not to allocate them as part of crash kernel's memory. > >> >> >>> > > >> >> >>> > But I'm not still convinced that we should export them in useable- > >> >> >>> > memory-range to crash dump kernel. They will be accessed through > >> >> >>> > acpi_os_map_memory() and so won't be required to be part of system ram > >> >> >>> > (or memblocks), I guess. > >> >> >>> > -> Bhupesh? > >> >> >>> > >> >> >>> I forgot how arm64 kernel retrieve the memory ranges and initialize > >> >> >>> them. If no "e820" like interfaces shouldn't kernel reinitialize all > >> >> >>> the memory according to the efi memmap? For kdump kernel anything other > >> >> >>> than usable memory (which is from the dt node instead) should be > >> >> >>> reinitialized according to efi passed info, no? > >> >> >> > >> >> >> All the regions exported in efi memmap will be added to memblock.memory > >> >> >> in (u)efi_init() and then trimmed down to the exact range specified as > >> >> >> usable-memory-range by fdt_enforce_memory_region(). > >> >> >> > >> >> >> Now I noticed that the current fdt_enforce_memory_region() may not work well > >> >> >> with multiple entries in usable-memory-range. > >> >> >> > >> >> > > >> >> > In any case, the root of the problem is that memory regions lose their > >> >> > 'memory' annotation due to the way the memory map is mangled before > >> >> > being supplied to the kexec kernel. > >> >> > > >> >> > Would it be possible to classify all memory that we want to hide from > >> >> > the kexec kernel as NOMAP instead? That way, it will not be mapped > >> >> > implicitly, but will still be mapped cacheable by acpi_os_ioremap(), > >> >> > so this seems to be the most appropriate way to deal with the host > >> >> > kernel's memory contents. > >> >> > >> >> Hmm. wouldn't appending the acpi reclaim regions to > >> >> 'linux,usable-memory-range' in the dtb being passed to the crashkernel > >> >> be better? Because its indirectly achieving a similar objective > >> >> (although may be a subset of all System RAM regions on the primary > >> >> kernel's memory). > >> >> > >> >> I am not aware of the background about the current kexec-tools > >> >> implementation where we add only the crashkernel range to the dtb > >> >> being passed to the crashkernel. > >> >> > >> >> Probably Akashi can answer better, as to how we arrived at this design > >> >> approach and why we didn't want to expose all System RAM regions (i.e. > >> >> ! NOMPAP regions) to the crashkernel. > >> >> > >> >> I am suspecting that some issues were seen/meet when the System RAM (! > >> >> NOMAP regions) were exposed to the crashkernel, and that's why we > >> >> finalized on this design approach, but this is something which is just > >> >> my guess. > >> >> > >> >> Regards, > >> >> Bhupesh > >> >> > >> >> >>> > > >> >> >>> > Just FYI, on x86, ACPI tables seems to be exposed to crash dump kernel > >> >> >>> > via a kernel command line parameter, "memmap=". > >> >> >>> > >> >> >>> memmap= is only used in old kexec-tools, now we are passing them via > >> >> >>> e820 table. > >> >> >> > >> >> >> Thanks. I remember that you have explained it before. > >> >> >> > >> >> >> -Takahiro AKASHI > >> >> >> > >> >> >>> [snip] > >> >> >>> > >> >> >>> Thanks > >> >> >>> Dave > >> > > >> > ===8<== > >> > From 74e2451fea83d546feae76160ba7de426913fe03 Mon Sep 17 00:00:00 2001 > >> > From: AKASHI Takahiro <takahiro.akashi@xxxxxxxxxx> > >> > Date: Thu, 21 Dec 2017 19:14:23 +0900 > >> > Subject: [PATCH] arm64: kdump: mark unusable memory as NOMAP > >> > > >> > --- > >> > arch/arm64/mm/init.c | 10 ++++++++-- > >> > 1 file changed, 8 insertions(+), 2 deletions(-) > >> > > >> > diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c > >> > index 00e7b900ca41..8175db94257b 100644 > >> > --- a/arch/arm64/mm/init.c > >> > +++ b/arch/arm64/mm/init.c > >> > @@ -352,11 +352,17 @@ static void __init fdt_enforce_memory_region(void) > >> > struct memblock_region reg = { > >> > .size = 0, > >> > }; > >> > + u64 idx; > >> > + phys_addr_t start, end; > >> > > >> > of_scan_flat_dt(early_init_dt_scan_usablemem, ®); > >> > > >> > - if (reg.size) > >> > - memblock_cap_memory_range(reg.base, reg.size); > >> > + if (reg.size) { > >> > + for_each_free_mem_range(idx, NUMA_NO_NODE, MEMBLOCK_NONE, > >> > + &start, &end, NULL) > >> > + memblock_mark_nomap(start, end - start); > >> > + memblock_clear_nomap(reg.base, reg.size); > >> > + } > >> > } > >> > > >> > void __init arm64_memblock_init(void) > >> > -- > >> > 2.15.1 > >> > > >> > >> Thanks for the patch. After applying this on top of > >> 4.15.0-rc4-next-20171220, there seems to be a improvement and the > >> crashkernel boot no longer hangs while trying to access the acpi > >> tables. > >> > >> However I notice a minor issue. Please see the log below for > >> reference, the following message keeps spamming the console but I see > >> the crashkernel boot proceed further.: > >> > >> [ 0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x70303 -> Node 3 > >> [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x3fffffff] > >> [ 0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x2000000000-0x2fffffffff] > >> [ 0.000000] ACPI: SRAT: Node 0 PXM 0 [mem 0x1000000000-0x1fffffffff] > >> [ 0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0xa000000000-0xafffffffff] > >> [ 0.000000] ACPI: SRAT: Node 2 PXM 2 [mem 0x9000000000-0x9fffffffff] > >> [ 0.000000] NUMA: NODE_DATA [mem 0x1ffbffe200-0x1ffbffffff] > >> [ 0.000000] NUMA: NODE_DATA [mem 0x1ffbffc400-0x1ffbffe1ff] > >> [ 0.000000] NUMA: NODE_DATA(1) on node 0 > >> [ 0.000000] NUMA: NODE_DATA [mem 0x1ffbffa600-0x1ffbffc3ff] > >> [ 0.000000] NUMA: NODE_DATA(2) on node 0 > >> [ 0.000000] NUMA: NODE_DATA [mem 0x1ffbff8800-0x1ffbffa5ff] > >> [ 0.000000] NUMA: NODE_DATA(3) on node 0 > >> [ 0.000000] [ffff7fe008000000-ffff7fe00800ffff] potential offnode > >> page_structs > >> [ 0.000000] [ffff7fe008010000-ffff7fe00801ffff] potential offnode > >> page_structs > >> [ 0.000000] [ffff7fe008020000-ffff7fe00802ffff] potential offnode > >> page_structs > >> [ 0.000000] [ffff7fe008030000-ffff7fe00803ffff] potential offnode > >> page_structs > >> [ 0.000000] [ffff7fe008040000-ffff7fe00804ffff] potential offnode > >> page_structs > >> [ 0.000000] [ffff7fe008050000-ffff7fe00805ffff] potential offnode > >> page_structs > >> > >> [snip..] > >> [ 0.000000] [ffff7fe0081f0000-ffff7fe0081fffff] potential offnode > >> page_structs > > > > These messages shows that some "struct page" data are allocated on remote > > (numa) nodes. > > Since on your crash dump kernel, all the usable system memory (starting > > 0x0e800000) belongs to Node#0, we can't avoid such non-local allocations. > > > > In my best guess, you can ingore them except for some performance penality. > > This may be one side-effect. > > > > So does your crash dump kernel now boot successfully? > > > > Indeed. The crash dump kernel now boots successfully and the crash > dump core can be saved properly as well (I tried saving it to local > disk). Thank you for the confirmation. (I'd like to suggest you to examine the core dump with crash utility.) > However, the 'potential offnode page_structs' WARN messages hog the > console and delay crashkernel boot for a significant duration, which > can be irritating. > > Can we also consider ratelimiting this WARNING message [which seems to > come from vmemmap_verify()] if invoked in the context of crash kernel, > in addition to making the above change suggested by you. Well, we may be able to change pr_warn() to pr_warn_once() here, but I hope that adding "numa=off" to kernel command line should also work. Thanks, -Takahiro AKASHI > Thanks for the help. > > Regards, > Bhupesh -- To unsubscribe from this list: send the line "unsubscribe linux-efi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
