Hi Boris,
On 03/10/2017 05:06 AM, Borislav Petkov wrote:
On Thu, Mar 02, 2017 at 10:15:15AM -0500, Brijesh Singh wrote:
If kernel_maps_pages_in_pgd is called early in boot process to change the
kernel_map_pages_in_pgd()
memory attributes then it fails to allocate memory when spliting large
pages. The patch extends the cpa_data to provide the support to use
memblock_alloc when slab allocator is not available.
The feature will be used in Secure Encrypted Virtualization (SEV) mode,
where we may need to change the memory region attributes in early boot
process.
Signed-off-by: Brijesh Singh <brijesh.singh@xxxxxxx>
---
arch/x86/mm/pageattr.c | 51 ++++++++++++++++++++++++++++++++++++++++--------
1 file changed, 42 insertions(+), 9 deletions(-)
diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c
index 46cc89d..9e4ab3b 100644
--- a/arch/x86/mm/pageattr.c
+++ b/arch/x86/mm/pageattr.c
@@ -14,6 +14,7 @@
#include <linux/gfp.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
+#include <linux/memblock.h>
#include <asm/e820/api.h>
#include <asm/processor.h>
@@ -37,6 +38,7 @@ struct cpa_data {
int flags;
unsigned long pfn;
unsigned force_split : 1;
+ unsigned force_memblock :1;
int curpage;
struct page **pages;
};
@@ -627,9 +629,8 @@ try_preserve_large_page(pte_t *kpte, unsigned long address,
static int
__split_large_page(struct cpa_data *cpa, pte_t *kpte, unsigned long address,
- struct page *base)
+ pte_t *pbase, unsigned long new_pfn)
{
- pte_t *pbase = (pte_t *)page_address(base);
unsigned long ref_pfn, pfn, pfninc = 1;
unsigned int i, level;
pte_t *tmp;
@@ -646,7 +647,7 @@ __split_large_page(struct cpa_data *cpa, pte_t *kpte, unsigned long address,
return 1;
}
- paravirt_alloc_pte(&init_mm, page_to_pfn(base));
+ paravirt_alloc_pte(&init_mm, new_pfn);
switch (level) {
case PG_LEVEL_2M:
@@ -707,7 +708,8 @@ __split_large_page(struct cpa_data *cpa, pte_t *kpte, unsigned long address,
* pagetable protections, the actual ptes set above control the
* primary protection behavior:
*/
- __set_pmd_pte(kpte, address, mk_pte(base, __pgprot(_KERNPG_TABLE)));
+ __set_pmd_pte(kpte, address,
+ native_make_pte((new_pfn << PAGE_SHIFT) + _KERNPG_TABLE));
/*
* Intel Atom errata AAH41 workaround.
@@ -723,21 +725,50 @@ __split_large_page(struct cpa_data *cpa, pte_t *kpte, unsigned long address,
return 0;
}
+static pte_t *try_alloc_pte(struct cpa_data *cpa, unsigned long *pfn)
+{
+ unsigned long phys;
+ struct page *base;
+
+ if (cpa->force_memblock) {
+ phys = memblock_alloc(PAGE_SIZE, PAGE_SIZE);
Maybe there's a reason this fires:
WARNING: modpost: Found 2 section mismatch(es).
To see full details build your kernel with:
'make CONFIG_DEBUG_SECTION_MISMATCH=y'
WARNING: vmlinux.o(.text+0x48edc): Section mismatch in reference from the function __change_page_attr() to the function .init.text:memblock_alloc()
The function __change_page_attr() references
the function __init memblock_alloc().
This is often because __change_page_attr lacks a __init
annotation or the annotation of memblock_alloc is wrong.
WARNING: vmlinux.o(.text+0x491d1): Section mismatch in reference from the function __change_page_attr() to the function .meminit.text:memblock_free()
The function __change_page_attr() references
the function __meminit memblock_free().
This is often because __change_page_attr lacks a __meminit
annotation or the annotation of memblock_free is wrong.
I can take a look at fixing those warning. In my initial attempt was to create
a new function to clear encryption bit but it ended up looking very similar to
__change_page_attr_set_clr() hence decided to extend the exiting function to
use memblock_alloc().
Why do we need this whole early mapping? For the guest? I don't like
that memblock thing at all.
Early in boot process, guest kernel allocates some structure (its either
statically allocated or dynamic allocated via memblock_alloc). And shares the physical
address of these structure with hypervisor. Since entire guest memory area is mapped
as encrypted hence those structure's are mapped as encrypted memory range. We need
a method to clear the encryption bit. Sometime these structure maybe part of 2M pages
and need to split into smaller pages.
So I think the approach with the .data..percpu..hv_shared section is
fine and we should consider SEV-ES
http://support.amd.com/TechDocs/Protecting%20VM%20Register%20State%20with%20SEV-ES.pdf
and do this right from the get-go so that when SEV-ES comes along, we
should simply be ready and extend that mechanism to put the whole Guest
Hypervisor Communication Block in there.
But then the fact that you're mapping those decrypted in init_mm.pgd
makes me think you don't need that early mapping thing at all. Those are
the decrypted mappings of the hypervisor. And that you can do late.
In most cases, guest and hypervisor communication starts as soon as guest provides
the physical address to hypervisor. So we must map the pages as decrypted before
sharing the physical address to hypervisor.
Now, what would be better, IMHO (and I have no idea about virtualization
design so take with a grain of salt) is if the guest would allocate
enough memory for the GHCB and mark it decrypted from the very
beginning. It will be the communication vehicle with the hypervisor
anyway.
And we already do similar things in sme_map_bootdata() for the baremetal
kernel to map boot_data, initrd, EFI, ... and so on things decrypted.
I will take a look at sme_map_bootdata but I believe the main difference is,
in case of SME those memory regions were allocated by bios or bootloader as
decrypted and sme_map_bootdata clears the encryptions bit.
In case of guest, memory maybe dynamically allocated at boot time and may not have same
attribute as early mapping.
And we should extend that mechanism to map the GHCB in the guest too and
then we can get rid of all that need for ->force_memblock which makes
the crazy mess in pageattr.c even crazier. And it would be lovely if we
can do it without it.
But maybe Paolo might have an even better idea...
I am sure he will have better idea :)
-Brijesh
--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
