On Mon, 2017-03-06 at 13:45 -0700, Tyler Baicar wrote:
> UEFI spec allows for non-standard section in Common Platform Error
> Record. This is defined in section N.2.3 of UEFI version 2.5.
>
> Currently if the CPER section's type (UUID) does not match with
> one of the section types that the kernel knows how to parse, the
> section is skipped. Therefore, user is not able to see
> such CPER data, for instance, error record of non-standard section.
>
> For above mentioned case, this change prints out the raw data in
> hex in dmesg buffer. Data length is taken from Error Data length
> field of Generic Error Data Entry.
Hi Tyler.
Trivia: (probably not worth resubmitting for this)
There's a slight mismatch between logging output and commit
message. Now there's an ASCII block after the output.
Another suggestion below.
> Following is a sample output from dmesg:
> [ 115.771702] {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 2
> [ 115.779042] {1}[Hardware Error]: It has been corrected by h/w and requires no further action
> [ 115.787456] {1}[Hardware Error]: event severity: corrected
> [ 115.792927] {1}[Hardware Error]: Error 0, type: corrected
> [ 115.798415] {1}[Hardware Error]: fru_id: 00000000-0000-0000-0000-000000000000
> [ 115.805596] {1}[Hardware Error]: fru_text:
> [ 115.816105] {1}[Hardware Error]: section type: d2e2621c-f936-468d-0d84-15a4ed015c8b
> [ 115.823880] {1}[Hardware Error]: section length: 88
> [ 115.828779] {1}[Hardware Error]: 00000000: 01000001 00000002 5f434345 525f4543
> [ 115.836153] {1}[Hardware Error]: 00000010: 0000574d 00000000 00000000 00000000
> [ 115.843531] {1}[Hardware Error]: 00000020: 00000000 00000000 00000000 00000000
> [ 115.850908] {1}[Hardware Error]: 00000030: 00000000 00000000 00000000 00000000
> [ 115.858288] {1}[Hardware Error]: 00000040: fe800000 00000000 00000004 5f434345
> [ 115.865665] {1}[Hardware Error]: 00000050: 525f4543 0000574d
[]
> diff --git a/drivers/firmware/efi/cper.c b/drivers/firmware/efi/cper.c
[]
> @@ -591,8 +591,16 @@ static void cper_estatus_print_section(
> cper_print_proc_arm(newpfx, arm_err);
> else
> goto err_section_too_small;
> - } else
> - printk("%s""section type: unknown, %pUl\n", newpfx, sec_type);
> + } else {
> + const void *unknown_err;
> +
> + unknown_err = acpi_hest_generic_data_payload(gdata);
> + printk("%ssection type: unknown, %pUl\n", newpfx, sec_type);
> + printk("%ssection length: %d\n", newpfx,
> + gdata->error_data_length);
It might be nice to output this as
printk("%ssection length: %d (%#x)\n",
newpfx, gdata->error_data_length, gdata->error_data_length);
so it's easy to know the appropriate hex buffer length too.
> + print_hex_dump(newpfx, "", DUMP_PREFIX_OFFSET, 16, 4,
> + unknown_err, gdata->error_data_length, true);
> + }
>
> return;
>
--
To unsubscribe from this list: send the line "unsubscribe linux-efi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
